HTTP 200 OK
Allow: GET, HEAD, OPTIONS
Content-Type: application/json
Vary: Accept
{
"count": 97,
"next": null,
"previous": "http://glycodata.org/api/gdd/polymer-solubility/?format=api&page=4",
"results": [
{
"id": 81,
"polymer": "Dextran",
"solvent": "Petroleum ether",
"concentration_mg_ml": "15.1",
"molecular_weight": "9000-10000",
"supplier": "Sigma",
"solubility_class": "Insoluble",
"transmission_10C": "8",
"transmission_25C": "1",
"transmission_60C": "1",
"cloud_point_C": "",
"method": "Experiment",
"conditions": "15.1 mg/mL, 10-60 °C, 0.5 °C/min",
"conditions_detail": "Crystal16 turbidity (645 nm), cooling ramp 60 to 10 °C at 0.5 °C/min after two heat/cool cycles; holds 120 min at 10 °C and 60 min at 60 and 25 °C; stirring 900 rpm. Sample: 15.1 mg/mL polymer, Mn 9000-10000 g/mol (Sigma). Transmission binned per 1 °C (median of Savitzky-Golay filtered cooling-phase points, n=51); observed range 1-8 %. Class thresholds from the source paper: insoluble <10 %, soluble >85 %, partial 10-85 %. Nonequilibrium (0.5 °C/min).",
"doi": "10.1021/acs.jpcb.4c06500",
"comments": "Dextran in Petroleum ether at 15.1 mg/mL is insoluble: turbid (T < 10 %) over the whole 10-60 °C cooling ramp. Class refers to nonequilibrium behaviour during the cooling ramp, not thermodynamic solubility. Data: Amrihesari et al., J. Phys. Chem. B 2024 (github.com/mona2442/Polymer-Solubility-Data_Crystal16)."
},
{
"id": 82,
"polymer": "Dextran",
"solvent": "Pyridine",
"concentration_mg_ml": "15.14",
"molecular_weight": "9000-10000",
"supplier": "Sigma",
"solubility_class": "Partially soluble",
"transmission_10C": "30",
"transmission_25C": "18",
"transmission_60C": "8",
"cloud_point_C": "",
"method": "Experiment",
"conditions": "15.14 mg/mL, 10-60 °C, 0.5 °C/min",
"conditions_detail": "Crystal16 turbidity (645 nm), cooling ramp 60 to 10 °C at 0.5 °C/min after two heat/cool cycles; holds 120 min at 10 °C and 60 min at 60 and 25 °C; stirring 900 rpm. Sample: 15.14 mg/mL polymer, Mn 9000-10000 g/mol (Sigma); solvent purity 99 %. Transmission binned per 1 °C (median of Savitzky-Golay filtered cooling-phase points, n=168); observed range 8-30 %. Class thresholds from the source paper: insoluble <10 %, soluble >85 %, partial 10-85 %. Nonequilibrium (0.5 °C/min).",
"doi": "10.1021/acs.jpcb.4c06500",
"comments": "Dextran in Pyridine at 15.14 mg/mL is partially soluble: transmission between 10 and 85 % at some temperature on cooling. Class refers to nonequilibrium behaviour during the cooling ramp, not thermodynamic solubility. Data: Amrihesari et al., J. Phys. Chem. B 2024 (github.com/mona2442/Polymer-Solubility-Data_Crystal16)."
},
{
"id": 83,
"polymer": "Dextran",
"solvent": "THF",
"concentration_mg_ml": "15.06",
"molecular_weight": "9000-10000",
"supplier": "Sigma",
"solubility_class": "Insoluble",
"transmission_10C": "1",
"transmission_25C": "1",
"transmission_60C": "1",
"cloud_point_C": "",
"method": "Experiment",
"conditions": "15.06 mg/mL, 10-60 °C, 0.5 °C/min",
"conditions_detail": "Crystal16 turbidity (645 nm), cooling ramp 60 to 10 °C at 0.5 °C/min after two heat/cool cycles; holds 120 min at 10 °C and 60 min at 60 and 25 °C; stirring 900 rpm. Sample: 15.06 mg/mL polymer, Mn 9000-10000 g/mol (Sigma); solvent purity 99 %. Transmission binned per 1 °C (median of Savitzky-Golay filtered cooling-phase points, n=51); observed range 1-1 %. Class thresholds from the source paper: insoluble <10 %, soluble >85 %, partial 10-85 %. Nonequilibrium (0.5 °C/min).",
"doi": "10.1021/acs.jpcb.4c06500",
"comments": "Dextran in THF at 15.06 mg/mL is insoluble: turbid (T < 10 %) over the whole 10-60 °C cooling ramp. Class refers to nonequilibrium behaviour during the cooling ramp, not thermodynamic solubility. Data: Amrihesari et al., J. Phys. Chem. B 2024 (github.com/mona2442/Polymer-Solubility-Data_Crystal16)."
},
{
"id": 84,
"polymer": "Dextran",
"solvent": "Toluene",
"concentration_mg_ml": "5.39",
"molecular_weight": "9000-10000",
"supplier": "Sigma",
"solubility_class": "Partially soluble",
"transmission_10C": "62",
"transmission_25C": "43",
"transmission_60C": "23",
"cloud_point_C": "",
"method": "Experiment",
"conditions": "5.39 mg/mL, 10-60 °C, 0.5 °C/min",
"conditions_detail": "Crystal16 turbidity (645 nm), cooling ramp 60 to 10 °C at 0.5 °C/min after two heat/cool cycles; holds 120 min at 10 °C and 60 min at 60 and 25 °C; stirring 900 rpm. Sample: 5.39 mg/mL polymer, Mn 9000-10000 g/mol (Sigma); solvent purity 99.9 %. Transmission binned per 1 °C (median of Savitzky-Golay filtered cooling-phase points, n=210); observed range 22-63 %. Class thresholds from the source paper: insoluble <10 %, soluble >85 %, partial 10-85 %. Nonequilibrium (0.5 °C/min).",
"doi": "10.1021/acs.jpcb.4c06500",
"comments": "Dextran in Toluene at 5.39 mg/mL is partially soluble: transmission between 10 and 85 % at some temperature on cooling. Class refers to nonequilibrium behaviour during the cooling ramp, not thermodynamic solubility. Data: Amrihesari et al., J. Phys. Chem. B 2024 (github.com/mona2442/Polymer-Solubility-Data_Crystal16)."
},
{
"id": 85,
"polymer": "Dextran",
"solvent": "Toluene",
"concentration_mg_ml": "50.11",
"molecular_weight": "9000-10000",
"supplier": "Sigma",
"solubility_class": "Insoluble",
"transmission_10C": "3",
"transmission_25C": "4",
"transmission_60C": "1",
"cloud_point_C": "",
"method": "Experiment",
"conditions": "50.11 mg/mL, 10-60 °C, 0.5 °C/min",
"conditions_detail": "Crystal16 turbidity (645 nm), cooling ramp 60 to 10 °C at 0.5 °C/min after two heat/cool cycles; holds 120 min at 10 °C and 60 min at 60 and 25 °C; stirring 900 rpm. Sample: 50.11 mg/mL polymer, Mn 9000-10000 g/mol (Sigma); solvent purity 99.9 %. Transmission binned per 1 °C (median of Savitzky-Golay filtered cooling-phase points, n=51); observed range 0-4 %. Class thresholds from the source paper: insoluble <10 %, soluble >85 %, partial 10-85 %. Nonequilibrium (0.5 °C/min).",
"doi": "10.1021/acs.jpcb.4c06500",
"comments": "Dextran in Toluene at 50.11 mg/mL is insoluble: turbid (T < 10 %) over the whole 10-60 °C cooling ramp. Class refers to nonequilibrium behaviour during the cooling ramp, not thermodynamic solubility. Data: Amrihesari et al., J. Phys. Chem. B 2024 (github.com/mona2442/Polymer-Solubility-Data_Crystal16)."
},
{
"id": 86,
"polymer": "Dextran",
"solvent": "Water",
"concentration_mg_ml": "5.18",
"molecular_weight": "9000-10000",
"supplier": "Sigma",
"solubility_class": "Soluble",
"transmission_10C": "100",
"transmission_25C": "100",
"transmission_60C": "100",
"cloud_point_C": "",
"method": "Experiment",
"conditions": "5.18 mg/mL, 10-60 °C, 0.5 °C/min",
"conditions_detail": "Crystal16 turbidity (645 nm), cooling ramp 60 to 10 °C at 0.5 °C/min after two heat/cool cycles; holds 120 min at 10 °C and 60 min at 60 and 25 °C; stirring 900 rpm. Sample: 5.18 mg/mL polymer, Mn 9000-10000 g/mol (Sigma). Transmission binned per 1 °C (median of Savitzky-Golay filtered cooling-phase points, n=51); observed range 100-100 %. Class thresholds from the source paper: insoluble <10 %, soluble >85 %, partial 10-85 %. Nonequilibrium (0.5 °C/min).",
"doi": "10.1021/acs.jpcb.4c06500",
"comments": "Dextran in Water at 5.18 mg/mL is soluble: clear (T > 85 %) over the whole 10-60 °C cooling ramp. Class refers to nonequilibrium behaviour during the cooling ramp, not thermodynamic solubility. Data: Amrihesari et al., J. Phys. Chem. B 2024 (github.com/mona2442/Polymer-Solubility-Data_Crystal16)."
},
{
"id": 87,
"polymer": "Dextran",
"solvent": "Water",
"concentration_mg_ml": "50.27",
"molecular_weight": "9000-10000",
"supplier": "Sigma",
"solubility_class": "Soluble",
"transmission_10C": "100",
"transmission_25C": "100",
"transmission_60C": "100",
"cloud_point_C": "",
"method": "Experiment",
"conditions": "50.27 mg/mL, 10-60 °C, 0.5 °C/min",
"conditions_detail": "Crystal16 turbidity (645 nm), cooling ramp 60 to 10 °C at 0.5 °C/min after two heat/cool cycles; holds 120 min at 10 °C and 60 min at 60 and 25 °C; stirring 900 rpm. Sample: 50.27 mg/mL polymer, Mn 9000-10000 g/mol (Sigma). Transmission binned per 1 °C (median of Savitzky-Golay filtered cooling-phase points, n=51); observed range 100-100 %. Class thresholds from the source paper: insoluble <10 %, soluble >85 %, partial 10-85 %. Nonequilibrium (0.5 °C/min).",
"doi": "10.1021/acs.jpcb.4c06500",
"comments": "Dextran in Water at 50.27 mg/mL is soluble: clear (T > 85 %) over the whole 10-60 °C cooling ramp. Class refers to nonequilibrium behaviour during the cooling ramp, not thermodynamic solubility. Data: Amrihesari et al., J. Phys. Chem. B 2024 (github.com/mona2442/Polymer-Solubility-Data_Crystal16)."
},
{
"id": 88,
"polymer": "Dextran",
"solvent": "Carbon disulfide",
"concentration_mg_ml": "15",
"molecular_weight": "9000-10000",
"supplier": "Sigma",
"solubility_class": "Partially soluble",
"transmission_10C": "22",
"transmission_25C": "22",
"transmission_60C": "17",
"cloud_point_C": "",
"method": "Experiment",
"conditions": "15 mg/mL, 10-60 °C, 0.5 °C/min",
"conditions_detail": "Crystal16 turbidity (645 nm), cooling ramp 60 to 10 °C at 0.5 °C/min after two heat/cool cycles; holds 120 min at 10 °C and 60 min at 60 and 25 °C; stirring 900 rpm. Sample: 15 mg/mL polymer, Mn 9000-10000 g/mol (Sigma); solvent purity 99.5 %. Transmission binned per 1 °C (median of Savitzky-Golay filtered cooling-phase points, n=210); observed range 10-47 %. Class thresholds from the source paper: insoluble <10 %, soluble >85 %, partial 10-85 %. Nonequilibrium (0.5 °C/min).",
"doi": "10.1021/acs.jpcb.4c06500",
"comments": "Dextran in Carbon disulfide at 15 mg/mL is partially soluble: transmission between 10 and 85 % at some temperature on cooling. Class refers to nonequilibrium behaviour during the cooling ramp, not thermodynamic solubility. Data: Amrihesari et al., J. Phys. Chem. B 2024 (github.com/mona2442/Polymer-Solubility-Data_Crystal16)."
},
{
"id": 89,
"polymer": "Dextran",
"solvent": "m-cresol",
"concentration_mg_ml": "15",
"molecular_weight": "9000-10000",
"supplier": "Sigma",
"solubility_class": "Partially soluble",
"transmission_10C": "55",
"transmission_25C": "67",
"transmission_60C": "43",
"cloud_point_C": "",
"method": "Experiment",
"conditions": "15 mg/mL, 10-60 °C, 0.5 °C/min",
"conditions_detail": "Crystal16 turbidity (645 nm), cooling ramp 60 to 10 °C at 0.5 °C/min after two heat/cool cycles; holds 120 min at 10 °C and 60 min at 60 and 25 °C; stirring 900 rpm. Sample: 15 mg/mL polymer, Mn 9000-10000 g/mol (Sigma); solvent purity 99 %. Transmission binned per 1 °C (median of Savitzky-Golay filtered cooling-phase points, n=210); observed range 41-84 %. Class thresholds from the source paper: insoluble <10 %, soluble >85 %, partial 10-85 %. Nonequilibrium (0.5 °C/min).",
"doi": "10.1021/acs.jpcb.4c06500",
"comments": "Dextran in m-cresol at 15 mg/mL is partially soluble: transmission between 10 and 85 % at some temperature on cooling. Class refers to nonequilibrium behaviour during the cooling ramp, not thermodynamic solubility. Data: Amrihesari et al., J. Phys. Chem. B 2024 (github.com/mona2442/Polymer-Solubility-Data_Crystal16)."
},
{
"id": 90,
"polymer": "Dextran",
"solvent": "m-cresol",
"concentration_mg_ml": "30",
"molecular_weight": "9000-10000",
"supplier": "Sigma",
"solubility_class": "Partially soluble",
"transmission_10C": "26",
"transmission_25C": "38",
"transmission_60C": "12",
"cloud_point_C": "",
"method": "Experiment",
"conditions": "30 mg/mL, 10-60 °C, 0.5 °C/min",
"conditions_detail": "Crystal16 turbidity (645 nm), cooling ramp 60 to 10 °C at 0.5 °C/min after two heat/cool cycles; holds 120 min at 10 °C and 60 min at 60 and 25 °C; stirring 900 rpm. Sample: 30 mg/mL polymer, Mn 9000-10000 g/mol (Sigma); solvent purity 99 %. Transmission binned per 1 °C (median of Savitzky-Golay filtered cooling-phase points, n=210); observed range 12-56 %. Class thresholds from the source paper: insoluble <10 %, soluble >85 %, partial 10-85 %. Nonequilibrium (0.5 °C/min).",
"doi": "10.1021/acs.jpcb.4c06500",
"comments": "Dextran in m-cresol at 30 mg/mL is partially soluble: transmission between 10 and 85 % at some temperature on cooling. Class refers to nonequilibrium behaviour during the cooling ramp, not thermodynamic solubility. Data: Amrihesari et al., J. Phys. Chem. B 2024 (github.com/mona2442/Polymer-Solubility-Data_Crystal16)."
},
{
"id": 91,
"polymer": "Dextran",
"solvent": "m-cresol",
"concentration_mg_ml": "5.04",
"molecular_weight": "9000-10000",
"supplier": "Sigma",
"solubility_class": "Partially soluble",
"transmission_10C": "93",
"transmission_25C": "100",
"transmission_60C": "100",
"cloud_point_C": "22",
"method": "Experiment",
"conditions": "5.04 mg/mL, 10-60 °C, 0.5 °C/min",
"conditions_detail": "Crystal16 turbidity (645 nm), cooling ramp 60 to 10 °C at 0.5 °C/min after two heat/cool cycles; holds 120 min at 10 °C and 60 min at 60 and 25 °C; stirring 900 rpm. Sample: 5.04 mg/mL polymer, Mn 9000-10000 g/mol (Sigma); solvent purity 99 %. Transmission binned per 1 °C (median of Savitzky-Golay filtered cooling-phase points, n=55); observed range 80-100 %. Class thresholds from the source paper: insoluble <10 %, soluble >85 %, partial 10-85 %. Nonequilibrium (0.5 °C/min).",
"doi": "10.1021/acs.jpcb.4c06500",
"comments": "Dextran in m-cresol at 5.04 mg/mL is partially soluble: transmission between 10 and 85 % at some temperature on cooling. Approx. cloud point on cooling ~22 °C. Class refers to nonequilibrium behaviour during the cooling ramp, not thermodynamic solubility. Data: Amrihesari et al., J. Phys. Chem. B 2024 (github.com/mona2442/Polymer-Solubility-Data_Crystal16)."
},
{
"id": 92,
"polymer": "Dextran",
"solvent": "m-cresol",
"concentration_mg_ml": "50",
"molecular_weight": "9000-10000",
"supplier": "Sigma",
"solubility_class": "Partially soluble",
"transmission_10C": "18",
"transmission_25C": "28",
"transmission_60C": "7",
"cloud_point_C": "",
"method": "Experiment",
"conditions": "50 mg/mL, 10-60 °C, 0.5 °C/min",
"conditions_detail": "Crystal16 turbidity (645 nm), cooling ramp 60 to 10 °C at 0.5 °C/min after two heat/cool cycles; holds 120 min at 10 °C and 60 min at 60 and 25 °C; stirring 900 rpm. Sample: 50 mg/mL polymer, Mn 9000-10000 g/mol (Sigma); solvent purity 99 %. Transmission binned per 1 °C (median of Savitzky-Golay filtered cooling-phase points, n=186); observed range 7-50 %. Class thresholds from the source paper: insoluble <10 %, soluble >85 %, partial 10-85 %. Nonequilibrium (0.5 °C/min).",
"doi": "10.1021/acs.jpcb.4c06500",
"comments": "Dextran in m-cresol at 50 mg/mL is partially soluble: transmission between 10 and 85 % at some temperature on cooling. Class refers to nonequilibrium behaviour during the cooling ramp, not thermodynamic solubility. Data: Amrihesari et al., J. Phys. Chem. B 2024 (github.com/mona2442/Polymer-Solubility-Data_Crystal16)."
},
{
"id": 93,
"polymer": "Dextran",
"solvent": "n-Hexane",
"concentration_mg_ml": "49.44",
"molecular_weight": "9000-10000",
"supplier": "Sigma",
"solubility_class": "Partially soluble",
"transmission_10C": "9",
"transmission_25C": "12",
"transmission_60C": "9",
"cloud_point_C": "",
"method": "Experiment",
"conditions": "49.44 mg/mL, 10-60 °C, 0.5 °C/min",
"conditions_detail": "Crystal16 turbidity (645 nm), cooling ramp 60 to 10 °C at 0.5 °C/min after two heat/cool cycles; holds 120 min at 10 °C and 60 min at 60 and 25 °C; stirring 900 rpm. Sample: 49.44 mg/mL polymer, Mn 9000-10000 g/mol (Sigma); solvent purity 99 %. Transmission binned per 1 °C (median of Savitzky-Golay filtered cooling-phase points, n=52); observed range 5-12 %. Class thresholds from the source paper: insoluble <10 %, soluble >85 %, partial 10-85 %. Nonequilibrium (0.5 °C/min).",
"doi": "10.1021/acs.jpcb.4c06500",
"comments": "Dextran in n-Hexane at 49.44 mg/mL is partially soluble: transmission between 10 and 85 % at some temperature on cooling. Class refers to nonequilibrium behaviour during the cooling ramp, not thermodynamic solubility. Data: Amrihesari et al., J. Phys. Chem. B 2024 (github.com/mona2442/Polymer-Solubility-Data_Crystal16)."
},
{
"id": 94,
"polymer": "Dextran",
"solvent": "n-Hexane",
"concentration_mg_ml": "5.57",
"molecular_weight": "9000-10000",
"supplier": "Sigma",
"solubility_class": "Partially soluble",
"transmission_10C": "34",
"transmission_25C": "33",
"transmission_60C": "25",
"cloud_point_C": "",
"method": "Experiment",
"conditions": "5.57 mg/mL, 10-60 °C, 0.5 °C/min",
"conditions_detail": "Crystal16 turbidity (645 nm), cooling ramp 60 to 10 °C at 0.5 °C/min after two heat/cool cycles; holds 120 min at 10 °C and 60 min at 60 and 25 °C; stirring 900 rpm. Sample: 5.57 mg/mL polymer, Mn 9000-10000 g/mol (Sigma); solvent purity 99 %. Transmission binned per 1 °C (median of Savitzky-Golay filtered cooling-phase points, n=210); observed range 25-38 %. Class thresholds from the source paper: insoluble <10 %, soluble >85 %, partial 10-85 %. Nonequilibrium (0.5 °C/min).",
"doi": "10.1021/acs.jpcb.4c06500",
"comments": "Dextran in n-Hexane at 5.57 mg/mL is partially soluble: transmission between 10 and 85 % at some temperature on cooling. Class refers to nonequilibrium behaviour during the cooling ramp, not thermodynamic solubility. Data: Amrihesari et al., J. Phys. Chem. B 2024 (github.com/mona2442/Polymer-Solubility-Data_Crystal16)."
},
{
"id": 95,
"polymer": "Dextran",
"solvent": "Styrene",
"concentration_mg_ml": "15",
"molecular_weight": "9000-10000",
"supplier": "Sigma",
"solubility_class": "Partially soluble",
"transmission_10C": "100",
"transmission_25C": "100",
"transmission_60C": "100",
"cloud_point_C": "20",
"method": "Experiment",
"conditions": "15 mg/mL, 10-60 °C, 0.5 °C/min",
"conditions_detail": "Crystal16 turbidity (645 nm), cooling ramp 60 to 10 °C at 0.5 °C/min after two heat/cool cycles; holds 120 min at 10 °C and 60 min at 60 and 25 °C; stirring 900 rpm. Sample: 15 mg/mL polymer, Mn 9000-10000 g/mol (Sigma). Transmission binned per 1 °C (median of Savitzky-Golay filtered cooling-phase points, n=52); observed range 78-100 %. Class thresholds from the source paper: insoluble <10 %, soluble >85 %, partial 10-85 %. Nonequilibrium (0.5 °C/min).",
"doi": "10.1021/acs.jpcb.4c06500",
"comments": "Dextran in Styrene at 15 mg/mL is partially soluble: transmission between 10 and 85 % at some temperature on cooling. Approx. cloud point on cooling ~20 °C. Class refers to nonequilibrium behaviour during the cooling ramp, not thermodynamic solubility. Data: Amrihesari et al., J. Phys. Chem. B 2024 (github.com/mona2442/Polymer-Solubility-Data_Crystal16)."
},
{
"id": 96,
"polymer": "Dextran",
"solvent": "Styrene",
"concentration_mg_ml": "15.1",
"molecular_weight": "9000-10000",
"supplier": "Sigma",
"solubility_class": "Partially soluble",
"transmission_10C": "28",
"transmission_25C": "52",
"transmission_60C": "99",
"cloud_point_C": "51",
"method": "Experiment",
"conditions": "15.1 mg/mL, 10-60 °C, 0.5 °C/min",
"conditions_detail": "Crystal16 turbidity (645 nm), cooling ramp 60 to 10 °C at 0.5 °C/min after two heat/cool cycles; holds 120 min at 10 °C and 60 min at 60 and 25 °C; stirring 900 rpm. Sample: 15.1 mg/mL polymer, Mn 9000-10000 g/mol (Sigma). Transmission binned per 1 °C (median of Savitzky-Golay filtered cooling-phase points, n=169); observed range 28-100 %. Class thresholds from the source paper: insoluble <10 %, soluble >85 %, partial 10-85 %. Nonequilibrium (0.5 °C/min).",
"doi": "10.1021/acs.jpcb.4c06500",
"comments": "Dextran in Styrene at 15.1 mg/mL is partially soluble: transmission between 10 and 85 % at some temperature on cooling. Approx. cloud point on cooling ~51 °C. Class refers to nonequilibrium behaviour during the cooling ramp, not thermodynamic solubility. Data: Amrihesari et al., J. Phys. Chem. B 2024 (github.com/mona2442/Polymer-Solubility-Data_Crystal16)."
},
{
"id": 97,
"polymer": "Dextran",
"solvent": "xylene",
"concentration_mg_ml": "14.95",
"molecular_weight": "9000-10000",
"supplier": "Sigma",
"solubility_class": "Partially soluble",
"transmission_10C": "26",
"transmission_25C": "21",
"transmission_60C": "10",
"cloud_point_C": "",
"method": "Experiment",
"conditions": "14.95 mg/mL, 10-60 °C, 0.5 °C/min",
"conditions_detail": "Crystal16 turbidity (645 nm), cooling ramp 60 to 10 °C at 0.5 °C/min after two heat/cool cycles; holds 120 min at 10 °C and 60 min at 60 and 25 °C; stirring 900 rpm. Sample: 14.95 mg/mL polymer, Mn 9000-10000 g/mol (Sigma). Transmission binned per 1 °C (median of Savitzky-Golay filtered cooling-phase points, n=192); observed range 10-27 %. Class thresholds from the source paper: insoluble <10 %, soluble >85 %, partial 10-85 %. Nonequilibrium (0.5 °C/min).",
"doi": "10.1021/acs.jpcb.4c06500",
"comments": "Dextran in xylene at 14.95 mg/mL is partially soluble: transmission between 10 and 85 % at some temperature on cooling. Class refers to nonequilibrium behaviour during the cooling ramp, not thermodynamic solubility. Data: Amrihesari et al., J. Phys. Chem. B 2024 (github.com/mona2442/Polymer-Solubility-Data_Crystal16)."
}
]
}