GET /api/gdd/polymer-solubility/?format=api
HTTP 200 OK
Allow: GET, HEAD, OPTIONS
Content-Type: application/json
Vary: Accept

{
    "count": 97,
    "next": "http://glycodata.org/api/gdd/polymer-solubility/?format=api&page=2",
    "previous": null,
    "results": [
        {
            "id": 1,
            "polymer": "Cellulose acetate",
            "solvent": "1,4-dioxane",
            "concentration_mg_ml": "15.01",
            "molecular_weight": "50000",
            "supplier": "Sigma",
            "solubility_class": "Partially soluble",
            "transmission_10C": "56",
            "transmission_25C": "100",
            "transmission_60C": "100",
            "cloud_point_C": "16",
            "method": "Experiment",
            "conditions": "15.01 mg/mL, 10-60 °C, 0.5 °C/min",
            "conditions_detail": "Crystal16 turbidity (645 nm), cooling ramp 60 to 10 °C at 0.5 °C/min after two heat/cool cycles; holds 120 min at 10 °C and 60 min at 60 and 25 °C; stirring 900 rpm. Sample: 15.01 mg/mL polymer, Mn 50000 g/mol (Sigma); solvent purity 99.8 %. Transmission binned per 1 °C (median of Savitzky-Golay filtered cooling-phase points, n=48); observed range 23-100 %. Class thresholds from the source paper: insoluble <10 %, soluble >85 %, partial 10-85 %. Nonequilibrium (0.5 °C/min).",
            "doi": "10.1021/acs.jpcb.4c06500",
            "comments": "Cellulose acetate in 1,4-dioxane at 15.01 mg/mL is partially soluble: transmission between 10 and 85 % at some temperature on cooling. Approx. cloud point on cooling ~16 °C. Class refers to nonequilibrium behaviour during the cooling ramp, not thermodynamic solubility. Data: Amrihesari et al., J. Phys. Chem. B 2024 (github.com/mona2442/Polymer-Solubility-Data_Crystal16)."
        },
        {
            "id": 2,
            "polymer": "Cellulose acetate",
            "solvent": "1-Octanol",
            "concentration_mg_ml": "14.98",
            "molecular_weight": "50000",
            "supplier": "Sigma",
            "solubility_class": "Partially soluble",
            "transmission_10C": "48",
            "transmission_25C": "43",
            "transmission_60C": "8",
            "cloud_point_C": "",
            "method": "Experiment",
            "conditions": "14.98 mg/mL, 10-60 °C, 0.5 °C/min",
            "conditions_detail": "Crystal16 turbidity (645 nm), cooling ramp 60 to 10 °C at 0.5 °C/min after two heat/cool cycles; holds 120 min at 10 °C and 60 min at 60 and 25 °C; stirring 900 rpm. Sample: 14.98 mg/mL polymer, Mn 50000 g/mol (Sigma); solvent purity 99 %. Transmission binned per 1 °C (median of Savitzky-Golay filtered cooling-phase points, n=186); observed range 8-58 %. Class thresholds from the source paper: insoluble <10 %, soluble >85 %, partial 10-85 %. Nonequilibrium (0.5 °C/min).",
            "doi": "10.1021/acs.jpcb.4c06500",
            "comments": "Cellulose acetate in 1-Octanol at 14.98 mg/mL is partially soluble: transmission between 10 and 85 % at some temperature on cooling. Class refers to nonequilibrium behaviour during the cooling ramp, not thermodynamic solubility. Data: Amrihesari et al., J. Phys. Chem. B 2024 (github.com/mona2442/Polymer-Solubility-Data_Crystal16)."
        },
        {
            "id": 3,
            "polymer": "Cellulose acetate",
            "solvent": "2,4,6-trimethylpyridine",
            "concentration_mg_ml": "15.04",
            "molecular_weight": "50000",
            "supplier": "Sigma",
            "solubility_class": "Partially soluble",
            "transmission_10C": "76",
            "transmission_25C": "80",
            "transmission_60C": "58",
            "cloud_point_C": "",
            "method": "Experiment",
            "conditions": "15.04 mg/mL, 10-60 °C, 0.5 °C/min",
            "conditions_detail": "Crystal16 turbidity (645 nm), cooling ramp 60 to 10 °C at 0.5 °C/min after two heat/cool cycles; holds 120 min at 10 °C and 60 min at 60 and 25 °C; stirring 900 rpm. Sample: 15.04 mg/mL polymer, Mn 50000 g/mol (Sigma); solvent purity 99 %. Transmission binned per 1 °C (median of Savitzky-Golay filtered cooling-phase points, n=209); observed range 38-95 %. Class thresholds from the source paper: insoluble <10 %, soluble >85 %, partial 10-85 %. Nonequilibrium (0.5 °C/min).",
            "doi": "10.1021/acs.jpcb.4c06500",
            "comments": "Cellulose acetate in 2,4,6-trimethylpyridine at 15.04 mg/mL is partially soluble: transmission between 10 and 85 % at some temperature on cooling. Class refers to nonequilibrium behaviour during the cooling ramp, not thermodynamic solubility. Data: Amrihesari et al., J. Phys. Chem. B 2024 (github.com/mona2442/Polymer-Solubility-Data_Crystal16)."
        },
        {
            "id": 4,
            "polymer": "Cellulose acetate",
            "solvent": "Acetonitrile",
            "concentration_mg_ml": "14.96",
            "molecular_weight": "50000",
            "supplier": "Sigma",
            "solubility_class": "Soluble",
            "transmission_10C": "100",
            "transmission_25C": "100",
            "transmission_60C": "100",
            "cloud_point_C": "",
            "method": "Experiment",
            "conditions": "14.96 mg/mL, 10-60 °C, 0.5 °C/min",
            "conditions_detail": "Crystal16 turbidity (645 nm), cooling ramp 60 to 10 °C at 0.5 °C/min after two heat/cool cycles; holds 120 min at 10 °C and 60 min at 60 and 25 °C; stirring 900 rpm. Sample: 14.96 mg/mL polymer, Mn 50000 g/mol (Sigma); solvent purity 99.5 %. Transmission binned per 1 °C (median of Savitzky-Golay filtered cooling-phase points, n=51); observed range 100-100 %. Class thresholds from the source paper: insoluble <10 %, soluble >85 %, partial 10-85 %. Nonequilibrium (0.5 °C/min).",
            "doi": "10.1021/acs.jpcb.4c06500",
            "comments": "Cellulose acetate in Acetonitrile at 14.96 mg/mL is soluble: clear (T > 85 %) over the whole 10-60 °C cooling ramp. Class refers to nonequilibrium behaviour during the cooling ramp, not thermodynamic solubility. Data: Amrihesari et al., J. Phys. Chem. B 2024 (github.com/mona2442/Polymer-Solubility-Data_Crystal16)."
        },
        {
            "id": 5,
            "polymer": "Cellulose acetate",
            "solvent": "Anisole",
            "concentration_mg_ml": "14.94",
            "molecular_weight": "50000",
            "supplier": "Sigma",
            "solubility_class": "Partially soluble",
            "transmission_10C": "100",
            "transmission_25C": "100",
            "transmission_60C": "100",
            "cloud_point_C": "",
            "method": "Experiment",
            "conditions": "14.94 mg/mL, 10-60 °C, 0.5 °C/min",
            "conditions_detail": "Crystal16 turbidity (645 nm), cooling ramp 60 to 10 °C at 0.5 °C/min after two heat/cool cycles; holds 120 min at 10 °C and 60 min at 60 and 25 °C; stirring 900 rpm. Sample: 14.94 mg/mL polymer, Mn 50000 g/mol (Sigma); solvent purity 99 %. Transmission binned per 1 °C (median of Savitzky-Golay filtered cooling-phase points, n=52); observed range 83-100 %. Class thresholds from the source paper: insoluble <10 %, soluble >85 %, partial 10-85 %. Nonequilibrium (0.5 °C/min).",
            "doi": "10.1021/acs.jpcb.4c06500",
            "comments": "Cellulose acetate in Anisole at 14.94 mg/mL is partially soluble: transmission between 10 and 85 % at some temperature on cooling. Class refers to nonequilibrium behaviour during the cooling ramp, not thermodynamic solubility. Data: Amrihesari et al., J. Phys. Chem. B 2024 (github.com/mona2442/Polymer-Solubility-Data_Crystal16)."
        },
        {
            "id": 6,
            "polymer": "Cellulose acetate",
            "solvent": "Benzene",
            "concentration_mg_ml": "14.91",
            "molecular_weight": "50000",
            "supplier": "Sigma",
            "solubility_class": "Partially soluble",
            "transmission_10C": "59",
            "transmission_25C": "69",
            "transmission_60C": "78",
            "cloud_point_C": "",
            "method": "Experiment",
            "conditions": "14.91 mg/mL, 10-60 °C, 0.5 °C/min",
            "conditions_detail": "Crystal16 turbidity (645 nm), cooling ramp 60 to 10 °C at 0.5 °C/min after two heat/cool cycles; holds 120 min at 10 °C and 60 min at 60 and 25 °C; stirring 900 rpm. Sample: 14.91 mg/mL polymer, Mn 50000 g/mol (Sigma); solvent purity 99 %. Transmission binned per 1 °C (median of Savitzky-Golay filtered cooling-phase points, n=146); observed range 58-100 %. Class thresholds from the source paper: insoluble <10 %, soluble >85 %, partial 10-85 %. Nonequilibrium (0.5 °C/min).",
            "doi": "10.1021/acs.jpcb.4c06500",
            "comments": "Cellulose acetate in Benzene at 14.91 mg/mL is partially soluble: transmission between 10 and 85 % at some temperature on cooling. Class refers to nonequilibrium behaviour during the cooling ramp, not thermodynamic solubility. Data: Amrihesari et al., J. Phys. Chem. B 2024 (github.com/mona2442/Polymer-Solubility-Data_Crystal16)."
        },
        {
            "id": 7,
            "polymer": "Cellulose acetate",
            "solvent": "Benzyl alcohol",
            "concentration_mg_ml": "15.04",
            "molecular_weight": "50000",
            "supplier": "Sigma",
            "solubility_class": "Partially soluble",
            "transmission_10C": "94",
            "transmission_25C": "64",
            "transmission_60C": "100",
            "cloud_point_C": "37",
            "method": "Experiment",
            "conditions": "15.04 mg/mL, 10-60 °C, 0.5 °C/min",
            "conditions_detail": "Crystal16 turbidity (645 nm), cooling ramp 60 to 10 °C at 0.5 °C/min after two heat/cool cycles; holds 120 min at 10 °C and 60 min at 60 and 25 °C; stirring 900 rpm. Sample: 15.04 mg/mL polymer, Mn 50000 g/mol (Sigma); solvent purity 99 %. Transmission binned per 1 °C (median of Savitzky-Golay filtered cooling-phase points, n=72); observed range 52-100 %. Class thresholds from the source paper: insoluble <10 %, soluble >85 %, partial 10-85 %. Nonequilibrium (0.5 °C/min).",
            "doi": "10.1021/acs.jpcb.4c06500",
            "comments": "Cellulose acetate in Benzyl alcohol at 15.04 mg/mL is partially soluble: transmission between 10 and 85 % at some temperature on cooling. Approx. cloud point on cooling ~37 °C. Class refers to nonequilibrium behaviour during the cooling ramp, not thermodynamic solubility. Data: Amrihesari et al., J. Phys. Chem. B 2024 (github.com/mona2442/Polymer-Solubility-Data_Crystal16)."
        },
        {
            "id": 8,
            "polymer": "Cellulose acetate",
            "solvent": "Chlorobenzene",
            "concentration_mg_ml": "14.97",
            "molecular_weight": "50000",
            "supplier": "Sigma",
            "solubility_class": "Partially soluble",
            "transmission_10C": "17",
            "transmission_25C": "25",
            "transmission_60C": "65",
            "cloud_point_C": "",
            "method": "Experiment",
            "conditions": "14.97 mg/mL, 10-60 °C, 0.5 °C/min",
            "conditions_detail": "Crystal16 turbidity (645 nm), cooling ramp 60 to 10 °C at 0.5 °C/min after two heat/cool cycles; holds 120 min at 10 °C and 60 min at 60 and 25 °C; stirring 900 rpm. Sample: 14.97 mg/mL polymer, Mn 50000 g/mol (Sigma); solvent purity 99 %. Transmission binned per 1 °C (median of Savitzky-Golay filtered cooling-phase points, n=211); observed range 16-65 %. Class thresholds from the source paper: insoluble <10 %, soluble >85 %, partial 10-85 %. Nonequilibrium (0.5 °C/min).",
            "doi": "10.1021/acs.jpcb.4c06500",
            "comments": "Cellulose acetate in Chlorobenzene at 14.97 mg/mL is partially soluble: transmission between 10 and 85 % at some temperature on cooling. Class refers to nonequilibrium behaviour during the cooling ramp, not thermodynamic solubility. Data: Amrihesari et al., J. Phys. Chem. B 2024 (github.com/mona2442/Polymer-Solubility-Data_Crystal16)."
        },
        {
            "id": 9,
            "polymer": "Cellulose acetate",
            "solvent": "Cyclohexanone",
            "concentration_mg_ml": "14.4",
            "molecular_weight": "50000",
            "supplier": "Sigma",
            "solubility_class": "Partially soluble",
            "transmission_10C": "",
            "transmission_25C": "",
            "transmission_60C": "",
            "cloud_point_C": "",
            "method": "Experiment",
            "conditions": "14.4 mg/mL, 10-60 °C, 0.5 °C/min",
            "conditions_detail": "Crystal16 turbidity (645 nm), cooling ramp 60 to 10 °C at 0.5 °C/min after two heat/cool cycles; holds 120 min at 10 °C and 60 min at 60 and 25 °C; stirring 900 rpm. Sample: 14.4 mg/mL polymer, Mn 50000 g/mol (Sigma); solvent purity 99.8 %. Transmission binned per 1 °C (median of Savitzky-Golay filtered cooling-phase points, n=2); observed range 74-74 %. Class thresholds from the source paper: insoluble <10 %, soluble >85 %, partial 10-85 %. Nonequilibrium (0.5 °C/min).",
            "doi": "10.1021/acs.jpcb.4c06500",
            "comments": "Cellulose acetate in Cyclohexanone at 14.4 mg/mL is partially soluble: transmission between 10 and 85 % at some temperature on cooling. Class refers to nonequilibrium behaviour during the cooling ramp, not thermodynamic solubility. Data: Amrihesari et al., J. Phys. Chem. B 2024 (github.com/mona2442/Polymer-Solubility-Data_Crystal16)."
        },
        {
            "id": 10,
            "polymer": "Cellulose acetate",
            "solvent": "Cyclopentanone",
            "concentration_mg_ml": "15.02",
            "molecular_weight": "50000",
            "supplier": "Sigma",
            "solubility_class": "Soluble",
            "transmission_10C": "100",
            "transmission_25C": "100",
            "transmission_60C": "100",
            "cloud_point_C": "",
            "method": "Experiment",
            "conditions": "15.02 mg/mL, 10-60 °C, 0.5 °C/min",
            "conditions_detail": "Crystal16 turbidity (645 nm), cooling ramp 60 to 10 °C at 0.5 °C/min after two heat/cool cycles; holds 120 min at 10 °C and 60 min at 60 and 25 °C; stirring 900 rpm. Sample: 15.02 mg/mL polymer, Mn 50000 g/mol (Sigma); solvent purity 99 %. Transmission binned per 1 °C (median of Savitzky-Golay filtered cooling-phase points, n=51); observed range 100-100 %. Class thresholds from the source paper: insoluble <10 %, soluble >85 %, partial 10-85 %. Nonequilibrium (0.5 °C/min).",
            "doi": "10.1021/acs.jpcb.4c06500",
            "comments": "Cellulose acetate in Cyclopentanone at 15.02 mg/mL is soluble: clear (T > 85 %) over the whole 10-60 °C cooling ramp. Class refers to nonequilibrium behaviour during the cooling ramp, not thermodynamic solubility. Data: Amrihesari et al., J. Phys. Chem. B 2024 (github.com/mona2442/Polymer-Solubility-Data_Crystal16)."
        },
        {
            "id": 11,
            "polymer": "Cellulose acetate",
            "solvent": "DMF",
            "concentration_mg_ml": "15.14",
            "molecular_weight": "50000",
            "supplier": "Sigma",
            "solubility_class": "Soluble",
            "transmission_10C": "100",
            "transmission_25C": "100",
            "transmission_60C": "100",
            "cloud_point_C": "",
            "method": "Experiment",
            "conditions": "15.14 mg/mL, 10-60 °C, 0.5 °C/min",
            "conditions_detail": "Crystal16 turbidity (645 nm), cooling ramp 60 to 10 °C at 0.5 °C/min after two heat/cool cycles; holds 120 min at 10 °C and 60 min at 60 and 25 °C; stirring 900 rpm. Sample: 15.14 mg/mL polymer, Mn 50000 g/mol (Sigma); solvent purity 99.8 %. Transmission binned per 1 °C (median of Savitzky-Golay filtered cooling-phase points, n=51); observed range 100-100 %. Class thresholds from the source paper: insoluble <10 %, soluble >85 %, partial 10-85 %. Nonequilibrium (0.5 °C/min).",
            "doi": "10.1021/acs.jpcb.4c06500",
            "comments": "Cellulose acetate in DMF at 15.14 mg/mL is soluble: clear (T > 85 %) over the whole 10-60 °C cooling ramp. Class refers to nonequilibrium behaviour during the cooling ramp, not thermodynamic solubility. Data: Amrihesari et al., J. Phys. Chem. B 2024 (github.com/mona2442/Polymer-Solubility-Data_Crystal16)."
        },
        {
            "id": 12,
            "polymer": "Cellulose acetate",
            "solvent": "DMSO",
            "concentration_mg_ml": "14.92",
            "molecular_weight": "50000",
            "supplier": "Sigma",
            "solubility_class": "Partially soluble",
            "transmission_10C": "0",
            "transmission_25C": "99",
            "transmission_60C": "100",
            "cloud_point_C": "19",
            "method": "Experiment",
            "conditions": "14.92 mg/mL, 10-60 °C, 0.5 °C/min",
            "conditions_detail": "Crystal16 turbidity (645 nm), cooling ramp 60 to 10 °C at 0.5 °C/min after two heat/cool cycles; holds 120 min at 10 °C and 60 min at 60 and 25 °C; stirring 900 rpm. Sample: 14.92 mg/mL polymer, Mn 50000 g/mol (Sigma); solvent purity 99.9 %. Transmission binned per 1 °C (median of Savitzky-Golay filtered cooling-phase points, n=46); observed range 0-100 %. Class thresholds from the source paper: insoluble <10 %, soluble >85 %, partial 10-85 %. Nonequilibrium (0.5 °C/min).",
            "doi": "10.1021/acs.jpcb.4c06500",
            "comments": "Cellulose acetate in DMSO at 14.92 mg/mL is partially soluble: transmission between 10 and 85 % at some temperature on cooling. Approx. cloud point on cooling ~19 °C. Class refers to nonequilibrium behaviour during the cooling ramp, not thermodynamic solubility. Data: Amrihesari et al., J. Phys. Chem. B 2024 (github.com/mona2442/Polymer-Solubility-Data_Crystal16)."
        },
        {
            "id": 13,
            "polymer": "Cellulose acetate",
            "solvent": "Diethyl ether",
            "concentration_mg_ml": "14.92",
            "molecular_weight": "50000",
            "supplier": "Sigma",
            "solubility_class": "Insoluble",
            "transmission_10C": "1",
            "transmission_25C": "1",
            "transmission_60C": "3",
            "cloud_point_C": "",
            "method": "Experiment",
            "conditions": "14.92 mg/mL, 10-60 °C, 0.5 °C/min",
            "conditions_detail": "Crystal16 turbidity (645 nm), cooling ramp 60 to 10 °C at 0.5 °C/min after two heat/cool cycles; holds 120 min at 10 °C and 60 min at 60 and 25 °C; stirring 900 rpm. Sample: 14.92 mg/mL polymer, Mn 50000 g/mol (Sigma); solvent purity 99.8 %. Transmission binned per 1 °C (median of Savitzky-Golay filtered cooling-phase points, n=51); observed range 1-3 %. Class thresholds from the source paper: insoluble <10 %, soluble >85 %, partial 10-85 %. Nonequilibrium (0.5 °C/min).",
            "doi": "10.1021/acs.jpcb.4c06500",
            "comments": "Cellulose acetate in Diethyl ether at 14.92 mg/mL is insoluble: turbid (T < 10 %) over the whole 10-60 °C cooling ramp. Class refers to nonequilibrium behaviour during the cooling ramp, not thermodynamic solubility. Data: Amrihesari et al., J. Phys. Chem. B 2024 (github.com/mona2442/Polymer-Solubility-Data_Crystal16)."
        },
        {
            "id": 14,
            "polymer": "Cellulose acetate",
            "solvent": "Ethanol",
            "concentration_mg_ml": "14.92",
            "molecular_weight": "50000",
            "supplier": "Sigma",
            "solubility_class": "Partially soluble",
            "transmission_10C": "1",
            "transmission_25C": "1",
            "transmission_60C": "1",
            "cloud_point_C": "",
            "method": "Experiment",
            "conditions": "14.92 mg/mL, 10-60 °C, 0.5 °C/min",
            "conditions_detail": "Crystal16 turbidity (645 nm), cooling ramp 60 to 10 °C at 0.5 °C/min after two heat/cool cycles; holds 120 min at 10 °C and 60 min at 60 and 25 °C; stirring 900 rpm. Sample: 14.92 mg/mL polymer, Mn 50000 g/mol (Sigma); solvent purity 90 %. Transmission binned per 1 °C (median of Savitzky-Golay filtered cooling-phase points, n=52); observed range 1-30 %. Class thresholds from the source paper: insoluble <10 %, soluble >85 %, partial 10-85 %. Nonequilibrium (0.5 °C/min).",
            "doi": "10.1021/acs.jpcb.4c06500",
            "comments": "Cellulose acetate in Ethanol at 14.92 mg/mL is partially soluble: transmission between 10 and 85 % at some temperature on cooling. Class refers to nonequilibrium behaviour during the cooling ramp, not thermodynamic solubility. Data: Amrihesari et al., J. Phys. Chem. B 2024 (github.com/mona2442/Polymer-Solubility-Data_Crystal16)."
        },
        {
            "id": 15,
            "polymer": "Cellulose acetate",
            "solvent": "Ethyl lactate",
            "concentration_mg_ml": "15.06",
            "molecular_weight": "50000",
            "supplier": "Sigma",
            "solubility_class": "Partially soluble",
            "transmission_10C": "100",
            "transmission_25C": "100",
            "transmission_60C": "100",
            "cloud_point_C": "26",
            "method": "Experiment",
            "conditions": "15.06 mg/mL, 10-60 °C, 0.5 °C/min",
            "conditions_detail": "Crystal16 turbidity (645 nm), cooling ramp 60 to 10 °C at 0.5 °C/min after two heat/cool cycles; holds 120 min at 10 °C and 60 min at 60 and 25 °C; stirring 900 rpm. Sample: 15.06 mg/mL polymer, Mn 50000 g/mol (Sigma); solvent purity 98 %. Transmission binned per 1 °C (median of Savitzky-Golay filtered cooling-phase points, n=61); observed range 35-100 %. Class thresholds from the source paper: insoluble <10 %, soluble >85 %, partial 10-85 %. Nonequilibrium (0.5 °C/min).",
            "doi": "10.1021/acs.jpcb.4c06500",
            "comments": "Cellulose acetate in Ethyl lactate at 15.06 mg/mL is partially soluble: transmission between 10 and 85 % at some temperature on cooling. Approx. cloud point on cooling ~26 °C. Class refers to nonequilibrium behaviour during the cooling ramp, not thermodynamic solubility. Data: Amrihesari et al., J. Phys. Chem. B 2024 (github.com/mona2442/Polymer-Solubility-Data_Crystal16)."
        },
        {
            "id": 16,
            "polymer": "Cellulose acetate",
            "solvent": "Heptane",
            "concentration_mg_ml": "15",
            "molecular_weight": "50000",
            "supplier": "Sigma",
            "solubility_class": "Partially soluble",
            "transmission_10C": "99",
            "transmission_25C": "94",
            "transmission_60C": "66",
            "cloud_point_C": "",
            "method": "Experiment",
            "conditions": "15 mg/mL, 10-60 °C, 0.5 °C/min",
            "conditions_detail": "Crystal16 turbidity (645 nm), cooling ramp 60 to 10 °C at 0.5 °C/min after two heat/cool cycles; holds 120 min at 10 °C and 60 min at 60 and 25 °C; stirring 900 rpm. Sample: 15 mg/mL polymer, Mn 50000 g/mol (Sigma); solvent purity 99 %. Transmission binned per 1 °C (median of Savitzky-Golay filtered cooling-phase points, n=140); observed range 62-100 %. Class thresholds from the source paper: insoluble <10 %, soluble >85 %, partial 10-85 %. Nonequilibrium (0.5 °C/min).",
            "doi": "10.1021/acs.jpcb.4c06500",
            "comments": "Cellulose acetate in Heptane at 15 mg/mL is partially soluble: transmission between 10 and 85 % at some temperature on cooling. Class refers to nonequilibrium behaviour during the cooling ramp, not thermodynamic solubility. Data: Amrihesari et al., J. Phys. Chem. B 2024 (github.com/mona2442/Polymer-Solubility-Data_Crystal16)."
        },
        {
            "id": 17,
            "polymer": "Cellulose acetate",
            "solvent": "Isobutyl acetate",
            "concentration_mg_ml": "14.98",
            "molecular_weight": "50000",
            "supplier": "Sigma",
            "solubility_class": "Insoluble",
            "transmission_10C": "6",
            "transmission_25C": "6",
            "transmission_60C": "6",
            "cloud_point_C": "",
            "method": "Experiment",
            "conditions": "14.98 mg/mL, 10-60 °C, 0.5 °C/min",
            "conditions_detail": "Crystal16 turbidity (645 nm), cooling ramp 60 to 10 °C at 0.5 °C/min after two heat/cool cycles; holds 120 min at 10 °C and 60 min at 60 and 25 °C; stirring 900 rpm. Sample: 14.98 mg/mL polymer, Mn 50000 g/mol (Sigma); solvent purity 99 %. Transmission binned per 1 °C (median of Savitzky-Golay filtered cooling-phase points, n=51); observed range 6-6 %. Class thresholds from the source paper: insoluble <10 %, soluble >85 %, partial 10-85 %. Nonequilibrium (0.5 °C/min).",
            "doi": "10.1021/acs.jpcb.4c06500",
            "comments": "Cellulose acetate in Isobutyl acetate at 14.98 mg/mL is insoluble: turbid (T < 10 %) over the whole 10-60 °C cooling ramp. Class refers to nonequilibrium behaviour during the cooling ramp, not thermodynamic solubility. Data: Amrihesari et al., J. Phys. Chem. B 2024 (github.com/mona2442/Polymer-Solubility-Data_Crystal16)."
        },
        {
            "id": 18,
            "polymer": "Cellulose acetate",
            "solvent": "Petroleum ether",
            "concentration_mg_ml": "15.03",
            "molecular_weight": "50000",
            "supplier": "Sigma",
            "solubility_class": "Partially soluble",
            "transmission_10C": "49",
            "transmission_25C": "42",
            "transmission_60C": "41",
            "cloud_point_C": "",
            "method": "Experiment",
            "conditions": "15.03 mg/mL, 10-60 °C, 0.5 °C/min",
            "conditions_detail": "Crystal16 turbidity (645 nm), cooling ramp 60 to 10 °C at 0.5 °C/min after two heat/cool cycles; holds 120 min at 10 °C and 60 min at 60 and 25 °C; stirring 900 rpm. Sample: 15.03 mg/mL polymer, Mn 50000 g/mol (Sigma). Transmission binned per 1 °C (median of Savitzky-Golay filtered cooling-phase points, n=210); observed range 35-54 %. Class thresholds from the source paper: insoluble <10 %, soluble >85 %, partial 10-85 %. Nonequilibrium (0.5 °C/min).",
            "doi": "10.1021/acs.jpcb.4c06500",
            "comments": "Cellulose acetate in Petroleum ether at 15.03 mg/mL is partially soluble: transmission between 10 and 85 % at some temperature on cooling. Class refers to nonequilibrium behaviour during the cooling ramp, not thermodynamic solubility. Data: Amrihesari et al., J. Phys. Chem. B 2024 (github.com/mona2442/Polymer-Solubility-Data_Crystal16)."
        },
        {
            "id": 19,
            "polymer": "Cellulose acetate",
            "solvent": "Pyridine",
            "concentration_mg_ml": "15.36",
            "molecular_weight": "50000",
            "supplier": "Sigma",
            "solubility_class": "Partially soluble",
            "transmission_10C": "100",
            "transmission_25C": "100",
            "transmission_60C": "100",
            "cloud_point_C": "",
            "method": "Experiment",
            "conditions": "15.36 mg/mL, 10-60 °C, 0.5 °C/min",
            "conditions_detail": "Crystal16 turbidity (645 nm), cooling ramp 60 to 10 °C at 0.5 °C/min after two heat/cool cycles; holds 120 min at 10 °C and 60 min at 60 and 25 °C; stirring 900 rpm. Sample: 15.36 mg/mL polymer, Mn 50000 g/mol (Sigma); solvent purity 99 %. Transmission binned per 1 °C (median of Savitzky-Golay filtered cooling-phase points, n=52); observed range 81-100 %. Class thresholds from the source paper: insoluble <10 %, soluble >85 %, partial 10-85 %. Nonequilibrium (0.5 °C/min).",
            "doi": "10.1021/acs.jpcb.4c06500",
            "comments": "Cellulose acetate in Pyridine at 15.36 mg/mL is partially soluble: transmission between 10 and 85 % at some temperature on cooling. Class refers to nonequilibrium behaviour during the cooling ramp, not thermodynamic solubility. Data: Amrihesari et al., J. Phys. Chem. B 2024 (github.com/mona2442/Polymer-Solubility-Data_Crystal16)."
        },
        {
            "id": 20,
            "polymer": "Cellulose acetate",
            "solvent": "Toluene",
            "concentration_mg_ml": "14.9",
            "molecular_weight": "50000",
            "supplier": "Sigma",
            "solubility_class": "Partially soluble",
            "transmission_10C": "80",
            "transmission_25C": "70",
            "transmission_60C": "73",
            "cloud_point_C": "",
            "method": "Experiment",
            "conditions": "14.9 mg/mL, 10-60 °C, 0.5 °C/min",
            "conditions_detail": "Crystal16 turbidity (645 nm), cooling ramp 60 to 10 °C at 0.5 °C/min after two heat/cool cycles; holds 120 min at 10 °C and 60 min at 60 and 25 °C; stirring 900 rpm. Sample: 14.9 mg/mL polymer, Mn 50000 g/mol (Sigma); solvent purity 99.9 %. Transmission binned per 1 °C (median of Savitzky-Golay filtered cooling-phase points, n=150); observed range 58-100 %. Class thresholds from the source paper: insoluble <10 %, soluble >85 %, partial 10-85 %. Nonequilibrium (0.5 °C/min).",
            "doi": "10.1021/acs.jpcb.4c06500",
            "comments": "Cellulose acetate in Toluene at 14.9 mg/mL is partially soluble: transmission between 10 and 85 % at some temperature on cooling. Class refers to nonequilibrium behaviour during the cooling ramp, not thermodynamic solubility. Data: Amrihesari et al., J. Phys. Chem. B 2024 (github.com/mona2442/Polymer-Solubility-Data_Crystal16)."
        }
    ]
}