{"count":97,"next":"http://glycodata.org/api/gdd/polymer-solubility/?format=json&page=5","previous":"http://glycodata.org/api/gdd/polymer-solubility/?format=json&page=3","results":[{"id":61,"polymer":"Dextran","solvent":"Cyclohexane","concentration_mg_ml":"15.11","molecular_weight":"9000-10000","supplier":"Sigma","solubility_class":"Partially soluble","transmission_10C":"27","transmission_25C":"23","transmission_60C":"18","cloud_point_C":"","method":"Experiment","conditions":"15.11 mg/mL, 10-60 °C, 0.5 °C/min","conditions_detail":"Crystal16 turbidity (645 nm), cooling ramp 60 to 10 °C at 0.5 °C/min after two heat/cool cycles; holds 120 min at 10 °C and 60 min at 60 and 25 °C; stirring 900 rpm. Sample: 15.11 mg/mL polymer, Mn 9000-10000 g/mol (Sigma); solvent purity 99.5 %. Transmission binned per 1 °C (median of Savitzky-Golay filtered cooling-phase points, n=210); observed range 15-33 %. Class thresholds from the source paper: insoluble <10 %, soluble >85 %, partial 10-85 %. Nonequilibrium (0.5 °C/min).","doi":"10.1021/acs.jpcb.4c06500","comments":"Dextran in Cyclohexane at 15.11 mg/mL is partially soluble: transmission between 10 and 85 % at some temperature on cooling. Class refers to nonequilibrium behaviour during the cooling ramp, not thermodynamic solubility. Data: Amrihesari et al., J. Phys. Chem. B 2024 (github.com/mona2442/Polymer-Solubility-Data_Crystal16)."},{"id":62,"polymer":"Dextran","solvent":"Cyclohexanone","concentration_mg_ml":"5.02","molecular_weight":"9000-10000","supplier":"Sigma","solubility_class":"Partially soluble","transmission_10C":"22","transmission_25C":"22","transmission_60C":"22","cloud_point_C":"","method":"Experiment","conditions":"5.02 mg/mL, 10-60 °C, 0.5 °C/min","conditions_detail":"Crystal16 turbidity (645 nm), cooling ramp 60 to 10 °C at 0.5 °C/min after two heat/cool cycles; holds 120 min at 10 °C and 60 min at 60 and 25 °C; stirring 900 rpm. Sample: 5.02 mg/mL polymer, Mn 9000-10000 g/mol (Sigma); solvent purity 99.8 %. Transmission binned per 1 °C (median of Savitzky-Golay filtered cooling-phase points, n=210); observed range 19-25 %. Class thresholds from the source paper: insoluble <10 %, soluble >85 %, partial 10-85 %. Nonequilibrium (0.5 °C/min).","doi":"10.1021/acs.jpcb.4c06500","comments":"Dextran in Cyclohexanone at 5.02 mg/mL is partially soluble: transmission between 10 and 85 % at some temperature on cooling. Class refers to nonequilibrium behaviour during the cooling ramp, not thermodynamic solubility. Data: Amrihesari et al., J. Phys. Chem. B 2024 (github.com/mona2442/Polymer-Solubility-Data_Crystal16)."},{"id":63,"polymer":"Dextran","solvent":"Cyclohexanone","concentration_mg_ml":"50","molecular_weight":"9000-10000","supplier":"Sigma","solubility_class":"Insoluble","transmission_10C":"0","transmission_25C":"0","transmission_60C":"0","cloud_point_C":"","method":"Experiment","conditions":"50 mg/mL, 10-60 °C, 0.5 °C/min","conditions_detail":"Crystal16 turbidity (645 nm), cooling ramp 60 to 10 °C at 0.5 °C/min after two heat/cool cycles; holds 120 min at 10 °C and 60 min at 60 and 25 °C; stirring 900 rpm. Sample: 50 mg/mL polymer, Mn 9000-10000 g/mol (Sigma); solvent purity 99.8 %. Transmission binned per 1 °C (median of Savitzky-Golay filtered cooling-phase points, n=51); observed range 0-0 %. Class thresholds from the source paper: insoluble <10 %, soluble >85 %, partial 10-85 %. Nonequilibrium (0.5 °C/min).","doi":"10.1021/acs.jpcb.4c06500","comments":"Dextran in Cyclohexanone at 50 mg/mL is insoluble: turbid (T < 10 %) over the whole 10-60 °C cooling ramp. Class refers to nonequilibrium behaviour during the cooling ramp, not thermodynamic solubility. Data: Amrihesari et al., J. Phys. Chem. B 2024 (github.com/mona2442/Polymer-Solubility-Data_Crystal16)."},{"id":64,"polymer":"Dextran","solvent":"Cyclopentanone","concentration_mg_ml":"15.03","molecular_weight":"9000-10000","supplier":"Sigma","solubility_class":"Insoluble","transmission_10C":"2","transmission_25C":"1","transmission_60C":"1","cloud_point_C":"","method":"Experiment","conditions":"15.03 mg/mL, 10-60 °C, 0.5 °C/min","conditions_detail":"Crystal16 turbidity (645 nm), cooling ramp 60 to 10 °C at 0.5 °C/min after two heat/cool cycles; holds 120 min at 10 °C and 60 min at 60 and 25 °C; stirring 900 rpm. Sample: 15.03 mg/mL polymer, Mn 9000-10000 g/mol (Sigma); solvent purity 99 %. Transmission binned per 1 °C (median of Savitzky-Golay filtered cooling-phase points, n=51); observed range 1-2 %. Class thresholds from the source paper: insoluble <10 %, soluble >85 %, partial 10-85 %. Nonequilibrium (0.5 °C/min).","doi":"10.1021/acs.jpcb.4c06500","comments":"Dextran in Cyclopentanone at 15.03 mg/mL is insoluble: turbid (T < 10 %) over the whole 10-60 °C cooling ramp. Class refers to nonequilibrium behaviour during the cooling ramp, not thermodynamic solubility. Data: Amrihesari et al., J. Phys. Chem. B 2024 (github.com/mona2442/Polymer-Solubility-Data_Crystal16)."},{"id":65,"polymer":"Dextran","solvent":"DMAc","concentration_mg_ml":"14.71","molecular_weight":"9000-10000","supplier":"Sigma","solubility_class":"Partially soluble","transmission_10C":"77","transmission_25C":"61","transmission_60C":"","cloud_point_C":"","method":"Experiment","conditions":"14.71 mg/mL, 10-60 °C, 0.5 °C/min","conditions_detail":"Crystal16 turbidity (645 nm), cooling ramp 60 to 10 °C at 0.5 °C/min after two heat/cool cycles; holds 120 min at 10 °C and 60 min at 60 and 25 °C; stirring 900 rpm. Sample: 14.71 mg/mL polymer, Mn 9000-10000 g/mol (Sigma); solvent purity 99 %. Transmission binned per 1 °C (median of Savitzky-Golay filtered cooling-phase points, n=90); observed range 53-83 %. Class thresholds from the source paper: insoluble <10 %, soluble >85 %, partial 10-85 %. Nonequilibrium (0.5 °C/min).","doi":"10.1021/acs.jpcb.4c06500","comments":"Dextran in DMAc at 14.71 mg/mL is partially soluble: transmission between 10 and 85 % at some temperature on cooling. Class refers to nonequilibrium behaviour during the cooling ramp, not thermodynamic solubility. Data: Amrihesari et al., J. Phys. Chem. B 2024 (github.com/mona2442/Polymer-Solubility-Data_Crystal16)."},{"id":66,"polymer":"Dextran","solvent":"DMF","concentration_mg_ml":"49.54","molecular_weight":"9000-10000","supplier":"Sigma","solubility_class":"Partially soluble","transmission_10C":"81","transmission_25C":"63","transmission_60C":"58","cloud_point_C":"","method":"Experiment","conditions":"49.54 mg/mL, 10-60 °C, 0.5 °C/min","conditions_detail":"Crystal16 turbidity (645 nm), cooling ramp 60 to 10 °C at 0.5 °C/min after two heat/cool cycles; holds 120 min at 10 °C and 60 min at 60 and 25 °C; stirring 900 rpm. Sample: 49.54 mg/mL polymer, Mn 9000-10000 g/mol (Sigma); solvent purity 99.8 %. Transmission binned per 1 °C (median of Savitzky-Golay filtered cooling-phase points, n=155); observed range 15-99 %. Class thresholds from the source paper: insoluble <10 %, soluble >85 %, partial 10-85 %. Nonequilibrium (0.5 °C/min).","doi":"10.1021/acs.jpcb.4c06500","comments":"Dextran in DMF at 49.54 mg/mL is partially soluble: transmission between 10 and 85 % at some temperature on cooling. Class refers to nonequilibrium behaviour during the cooling ramp, not thermodynamic solubility. Data: Amrihesari et al., J. Phys. Chem. B 2024 (github.com/mona2442/Polymer-Solubility-Data_Crystal16)."},{"id":67,"polymer":"Dextran","solvent":"DMF","concentration_mg_ml":"5.39","molecular_weight":"9000-10000","supplier":"Sigma","solubility_class":"Partially soluble","transmission_10C":"100","transmission_25C":"71","transmission_60C":"100","cloud_point_C":"44","method":"Experiment","conditions":"5.39 mg/mL, 10-60 °C, 0.5 °C/min","conditions_detail":"Crystal16 turbidity (645 nm), cooling ramp 60 to 10 °C at 0.5 °C/min after two heat/cool cycles; holds 120 min at 10 °C and 60 min at 60 and 25 °C; stirring 900 rpm. Sample: 5.39 mg/mL polymer, Mn 9000-10000 g/mol (Sigma); solvent purity 99.8 %. Transmission binned per 1 °C (median of Savitzky-Golay filtered cooling-phase points, n=83); observed range 55-100 %. Class thresholds from the source paper: insoluble <10 %, soluble >85 %, partial 10-85 %. Nonequilibrium (0.5 °C/min).","doi":"10.1021/acs.jpcb.4c06500","comments":"Dextran in DMF at 5.39 mg/mL is partially soluble: transmission between 10 and 85 % at some temperature on cooling. Approx. cloud point on cooling ~44 °C. Class refers to nonequilibrium behaviour during the cooling ramp, not thermodynamic solubility. Data: Amrihesari et al., J. Phys. Chem. B 2024 (github.com/mona2442/Polymer-Solubility-Data_Crystal16)."},{"id":68,"polymer":"Dextran","solvent":"DMSO","concentration_mg_ml":"14.66","molecular_weight":"9000-10000","supplier":"Sigma","solubility_class":"Partially soluble","transmission_10C":"43","transmission_25C":"100","transmission_60C":"100","cloud_point_C":"18","method":"Experiment","conditions":"14.66 mg/mL, 10-60 °C, 0.5 °C/min","conditions_detail":"Crystal16 turbidity (645 nm), cooling ramp 60 to 10 °C at 0.5 °C/min after two heat/cool cycles; holds 120 min at 10 °C and 60 min at 60 and 25 °C; stirring 900 rpm. Sample: 14.66 mg/mL polymer, Mn 9000-10000 g/mol (Sigma); solvent purity 99.9 %. Transmission binned per 1 °C (median of Savitzky-Golay filtered cooling-phase points, n=49); observed range 0-100 %. Class thresholds from the source paper: insoluble <10 %, soluble >85 %, partial 10-85 %. Nonequilibrium (0.5 °C/min).","doi":"10.1021/acs.jpcb.4c06500","comments":"Dextran in DMSO at 14.66 mg/mL is partially soluble: transmission between 10 and 85 % at some temperature on cooling. Approx. cloud point on cooling ~18 °C. Class refers to nonequilibrium behaviour during the cooling ramp, not thermodynamic solubility. Data: Amrihesari et al., J. Phys. Chem. B 2024 (github.com/mona2442/Polymer-Solubility-Data_Crystal16)."},{"id":69,"polymer":"Dextran","solvent":"DMSO","concentration_mg_ml":"4.96","molecular_weight":"9000-10000","supplier":"Sigma","solubility_class":"Partially soluble","transmission_10C":"0","transmission_25C":"100","transmission_60C":"100","cloud_point_C":"22","method":"Experiment","conditions":"4.96 mg/mL, 10-60 °C, 0.5 °C/min","conditions_detail":"Crystal16 turbidity (645 nm), cooling ramp 60 to 10 °C at 0.5 °C/min after two heat/cool cycles; holds 120 min at 10 °C and 60 min at 60 and 25 °C; stirring 900 rpm. Sample: 4.96 mg/mL polymer, Mn 9000-10000 g/mol (Sigma); solvent purity 99.9 %. Transmission binned per 1 °C (median of Savitzky-Golay filtered cooling-phase points, n=52); observed range 0-100 %. Class thresholds from the source paper: insoluble <10 %, soluble >85 %, partial 10-85 %. Nonequilibrium (0.5 °C/min).","doi":"10.1021/acs.jpcb.4c06500","comments":"Dextran in DMSO at 4.96 mg/mL is partially soluble: transmission between 10 and 85 % at some temperature on cooling. Approx. cloud point on cooling ~22 °C. Class refers to nonequilibrium behaviour during the cooling ramp, not thermodynamic solubility. Data: Amrihesari et al., J. Phys. Chem. B 2024 (github.com/mona2442/Polymer-Solubility-Data_Crystal16)."},{"id":70,"polymer":"Dextran","solvent":"DMSO","concentration_mg_ml":"50.03","molecular_weight":"9000-10000","supplier":"Sigma","solubility_class":"Partially soluble","transmission_10C":"0","transmission_25C":"100","transmission_60C":"100","cloud_point_C":"21","method":"Experiment","conditions":"50.03 mg/mL, 10-60 °C, 0.5 °C/min","conditions_detail":"Crystal16 turbidity (645 nm), cooling ramp 60 to 10 °C at 0.5 °C/min after two heat/cool cycles; holds 120 min at 10 °C and 60 min at 60 and 25 °C; stirring 900 rpm. Sample: 50.03 mg/mL polymer, Mn 9000-10000 g/mol (Sigma); solvent purity 99.9 %. Transmission binned per 1 °C (median of Savitzky-Golay filtered cooling-phase points, n=47); observed range 0-100 %. Class thresholds from the source paper: insoluble <10 %, soluble >85 %, partial 10-85 %. Nonequilibrium (0.5 °C/min).","doi":"10.1021/acs.jpcb.4c06500","comments":"Dextran in DMSO at 50.03 mg/mL is partially soluble: transmission between 10 and 85 % at some temperature on cooling. Approx. cloud point on cooling ~21 °C. Class refers to nonequilibrium behaviour during the cooling ramp, not thermodynamic solubility. Data: Amrihesari et al., J. Phys. Chem. B 2024 (github.com/mona2442/Polymer-Solubility-Data_Crystal16)."},{"id":71,"polymer":"Dextran","solvent":"Diethyl ether","concentration_mg_ml":"15.03","molecular_weight":"9000-10000","supplier":"Sigma","solubility_class":"Insoluble","transmission_10C":"0","transmission_25C":"0","transmission_60C":"0","cloud_point_C":"","method":"Experiment","conditions":"15.03 mg/mL, 10-60 °C, 0.5 °C/min","conditions_detail":"Crystal16 turbidity (645 nm), cooling ramp 60 to 10 °C at 0.5 °C/min after two heat/cool cycles; holds 120 min at 10 °C and 60 min at 60 and 25 °C; stirring 900 rpm. Sample: 15.03 mg/mL polymer, Mn 9000-10000 g/mol (Sigma); solvent purity 99.8 %. Transmission binned per 1 °C (median of Savitzky-Golay filtered cooling-phase points, n=51); observed range 0-0 %. Class thresholds from the source paper: insoluble <10 %, soluble >85 %, partial 10-85 %. Nonequilibrium (0.5 °C/min).","doi":"10.1021/acs.jpcb.4c06500","comments":"Dextran in Diethyl ether at 15.03 mg/mL is insoluble: turbid (T < 10 %) over the whole 10-60 °C cooling ramp. Class refers to nonequilibrium behaviour during the cooling ramp, not thermodynamic solubility. Data: Amrihesari et al., J. Phys. Chem. B 2024 (github.com/mona2442/Polymer-Solubility-Data_Crystal16)."},{"id":72,"polymer":"Dextran","solvent":"Ethyl acetate","concentration_mg_ml":"14.54","molecular_weight":"9000-10000","supplier":"Sigma","solubility_class":"Insoluble","transmission_10C":"0","transmission_25C":"0","transmission_60C":"0","cloud_point_C":"","method":"Experiment","conditions":"14.54 mg/mL, 10-60 °C, 0.5 °C/min","conditions_detail":"Crystal16 turbidity (645 nm), cooling ramp 60 to 10 °C at 0.5 °C/min after two heat/cool cycles; holds 120 min at 10 °C and 60 min at 60 and 25 °C; stirring 900 rpm. Sample: 14.54 mg/mL polymer, Mn 9000-10000 g/mol (Sigma); solvent purity 99.5 %. Transmission binned per 1 °C (median of Savitzky-Golay filtered cooling-phase points, n=51); observed range 0-0 %. Class thresholds from the source paper: insoluble <10 %, soluble >85 %, partial 10-85 %. Nonequilibrium (0.5 °C/min).","doi":"10.1021/acs.jpcb.4c06500","comments":"Dextran in Ethyl acetate at 14.54 mg/mL is insoluble: turbid (T < 10 %) over the whole 10-60 °C cooling ramp. Class refers to nonequilibrium behaviour during the cooling ramp, not thermodynamic solubility. Data: Amrihesari et al., J. Phys. Chem. B 2024 (github.com/mona2442/Polymer-Solubility-Data_Crystal16)."},{"id":73,"polymer":"Dextran","solvent":"Ethyl lactate","concentration_mg_ml":"15.07","molecular_weight":"9000-10000","supplier":"Sigma","solubility_class":"Insoluble","transmission_10C":"1","transmission_25C":"1","transmission_60C":"1","cloud_point_C":"","method":"Experiment","conditions":"15.07 mg/mL, 10-60 °C, 0.5 °C/min","conditions_detail":"Crystal16 turbidity (645 nm), cooling ramp 60 to 10 °C at 0.5 °C/min after two heat/cool cycles; holds 120 min at 10 °C and 60 min at 60 and 25 °C; stirring 900 rpm. Sample: 15.07 mg/mL polymer, Mn 9000-10000 g/mol (Sigma); solvent purity 98 %. Transmission binned per 1 °C (median of Savitzky-Golay filtered cooling-phase points, n=51); observed range 1-1 %. Class thresholds from the source paper: insoluble <10 %, soluble >85 %, partial 10-85 %. Nonequilibrium (0.5 °C/min).","doi":"10.1021/acs.jpcb.4c06500","comments":"Dextran in Ethyl lactate at 15.07 mg/mL is insoluble: turbid (T < 10 %) over the whole 10-60 °C cooling ramp. Class refers to nonequilibrium behaviour during the cooling ramp, not thermodynamic solubility. Data: Amrihesari et al., J. Phys. Chem. B 2024 (github.com/mona2442/Polymer-Solubility-Data_Crystal16)."},{"id":74,"polymer":"Dextran","solvent":"Formamide","concentration_mg_ml":"15.02","molecular_weight":"9000-10000","supplier":"Sigma","solubility_class":"Soluble","transmission_10C":"100","transmission_25C":"100","transmission_60C":"100","cloud_point_C":"","method":"Experiment","conditions":"15.02 mg/mL, 10-60 °C, 0.5 °C/min","conditions_detail":"Crystal16 turbidity (645 nm), cooling ramp 60 to 10 °C at 0.5 °C/min after two heat/cool cycles; holds 120 min at 10 °C and 60 min at 60 and 25 °C; stirring 900 rpm. Sample: 15.02 mg/mL polymer, Mn 9000-10000 g/mol (Sigma). Transmission binned per 1 °C (median of Savitzky-Golay filtered cooling-phase points, n=51); observed range 98-100 %. Class thresholds from the source paper: insoluble <10 %, soluble >85 %, partial 10-85 %. Nonequilibrium (0.5 °C/min).","doi":"10.1021/acs.jpcb.4c06500","comments":"Dextran in Formamide at 15.02 mg/mL is soluble: clear (T > 85 %) over the whole 10-60 °C cooling ramp. Class refers to nonequilibrium behaviour during the cooling ramp, not thermodynamic solubility. Data: Amrihesari et al., J. Phys. Chem. B 2024 (github.com/mona2442/Polymer-Solubility-Data_Crystal16)."},{"id":75,"polymer":"Dextran","solvent":"Heptane","concentration_mg_ml":"15.05","molecular_weight":"9000-10000","supplier":"Sigma","solubility_class":"Partially soluble","transmission_10C":"47","transmission_25C":"38","transmission_60C":"26","cloud_point_C":"","method":"Experiment","conditions":"15.05 mg/mL, 10-60 °C, 0.5 °C/min","conditions_detail":"Crystal16 turbidity (645 nm), cooling ramp 60 to 10 °C at 0.5 °C/min after two heat/cool cycles; holds 120 min at 10 °C and 60 min at 60 and 25 °C; stirring 900 rpm. Sample: 15.05 mg/mL polymer, Mn 9000-10000 g/mol (Sigma); solvent purity 99 %. Transmission binned per 1 °C (median of Savitzky-Golay filtered cooling-phase points, n=211); observed range 15-59 %. Class thresholds from the source paper: insoluble <10 %, soluble >85 %, partial 10-85 %. Nonequilibrium (0.5 °C/min).","doi":"10.1021/acs.jpcb.4c06500","comments":"Dextran in Heptane at 15.05 mg/mL is partially soluble: transmission between 10 and 85 % at some temperature on cooling. Class refers to nonequilibrium behaviour during the cooling ramp, not thermodynamic solubility. Data: Amrihesari et al., J. Phys. Chem. B 2024 (github.com/mona2442/Polymer-Solubility-Data_Crystal16)."},{"id":76,"polymer":"Dextran","solvent":"Isobutyl acetate","concentration_mg_ml":"14.9","molecular_weight":"9000-10000","supplier":"Sigma","solubility_class":"Insoluble","transmission_10C":"2","transmission_25C":"2","transmission_60C":"3","cloud_point_C":"","method":"Experiment","conditions":"14.9 mg/mL, 10-60 °C, 0.5 °C/min","conditions_detail":"Crystal16 turbidity (645 nm), cooling ramp 60 to 10 °C at 0.5 °C/min after two heat/cool cycles; holds 120 min at 10 °C and 60 min at 60 and 25 °C; stirring 900 rpm. Sample: 14.9 mg/mL polymer, Mn 9000-10000 g/mol (Sigma); solvent purity 99 %. Transmission binned per 1 °C (median of Savitzky-Golay filtered cooling-phase points, n=50); observed range 2-4 %. Class thresholds from the source paper: insoluble <10 %, soluble >85 %, partial 10-85 %. Nonequilibrium (0.5 °C/min).","doi":"10.1021/acs.jpcb.4c06500","comments":"Dextran in Isobutyl acetate at 14.9 mg/mL is insoluble: turbid (T < 10 %) over the whole 10-60 °C cooling ramp. Class refers to nonequilibrium behaviour during the cooling ramp, not thermodynamic solubility. Data: Amrihesari et al., J. Phys. Chem. B 2024 (github.com/mona2442/Polymer-Solubility-Data_Crystal16)."},{"id":77,"polymer":"Dextran","solvent":"NMP","concentration_mg_ml":"15.2","molecular_weight":"9000-10000","supplier":"Sigma","solubility_class":"Partially soluble","transmission_10C":"100","transmission_25C":"61","transmission_60C":"63","cloud_point_C":"","method":"Experiment","conditions":"15.2 mg/mL, 10-60 °C, 0.5 °C/min","conditions_detail":"Crystal16 turbidity (645 nm), cooling ramp 60 to 10 °C at 0.5 °C/min after two heat/cool cycles; holds 120 min at 10 °C and 60 min at 60 and 25 °C; stirring 900 rpm. Sample: 15.2 mg/mL polymer, Mn 9000-10000 g/mol (Sigma); solvent purity 99 %. Transmission binned per 1 °C (median of Savitzky-Golay filtered cooling-phase points, n=93); observed range 39-100 %. Class thresholds from the source paper: insoluble <10 %, soluble >85 %, partial 10-85 %. Nonequilibrium (0.5 °C/min).","doi":"10.1021/acs.jpcb.4c06500","comments":"Dextran in NMP at 15.2 mg/mL is partially soluble: transmission between 10 and 85 % at some temperature on cooling. Class refers to nonequilibrium behaviour during the cooling ramp, not thermodynamic solubility. Data: Amrihesari et al., J. Phys. Chem. B 2024 (github.com/mona2442/Polymer-Solubility-Data_Crystal16)."},{"id":78,"polymer":"Dextran","solvent":"NMP","concentration_mg_ml":"5","molecular_weight":"9000-10000","supplier":"Sigma","solubility_class":"Partially soluble","transmission_10C":"100","transmission_25C":"58","transmission_60C":"100","cloud_point_C":"59","method":"Experiment","conditions":"5 mg/mL, 10-60 °C, 0.5 °C/min","conditions_detail":"Crystal16 turbidity (645 nm), cooling ramp 60 to 10 °C at 0.5 °C/min after two heat/cool cycles; holds 120 min at 10 °C and 60 min at 60 and 25 °C; stirring 900 rpm. Sample: 5 mg/mL polymer, Mn 9000-10000 g/mol (Sigma); solvent purity 99 %. Transmission binned per 1 °C (median of Savitzky-Golay filtered cooling-phase points, n=131); observed range 41-100 %. Class thresholds from the source paper: insoluble <10 %, soluble >85 %, partial 10-85 %. Nonequilibrium (0.5 °C/min).","doi":"10.1021/acs.jpcb.4c06500","comments":"Dextran in NMP at 5 mg/mL is partially soluble: transmission between 10 and 85 % at some temperature on cooling. Approx. cloud point on cooling ~59 °C. Class refers to nonequilibrium behaviour during the cooling ramp, not thermodynamic solubility. Data: Amrihesari et al., J. Phys. Chem. B 2024 (github.com/mona2442/Polymer-Solubility-Data_Crystal16)."},{"id":79,"polymer":"Dextran","solvent":"NMP","concentration_mg_ml":"50.01","molecular_weight":"9000-10000","supplier":"Sigma","solubility_class":"Partially soluble","transmission_10C":"100","transmission_25C":"68","transmission_60C":"65","cloud_point_C":"","method":"Experiment","conditions":"50.01 mg/mL, 10-60 °C, 0.5 °C/min","conditions_detail":"Crystal16 turbidity (645 nm), cooling ramp 60 to 10 °C at 0.5 °C/min after two heat/cool cycles; holds 120 min at 10 °C and 60 min at 60 and 25 °C; stirring 900 rpm. Sample: 50.01 mg/mL polymer, Mn 9000-10000 g/mol (Sigma); solvent purity 99 %. Transmission binned per 1 °C (median of Savitzky-Golay filtered cooling-phase points, n=106); observed range 26-100 %. Class thresholds from the source paper: insoluble <10 %, soluble >85 %, partial 10-85 %. Nonequilibrium (0.5 °C/min).","doi":"10.1021/acs.jpcb.4c06500","comments":"Dextran in NMP at 50.01 mg/mL is partially soluble: transmission between 10 and 85 % at some temperature on cooling. Class refers to nonequilibrium behaviour during the cooling ramp, not thermodynamic solubility. Data: Amrihesari et al., J. Phys. Chem. B 2024 (github.com/mona2442/Polymer-Solubility-Data_Crystal16)."},{"id":80,"polymer":"Dextran","solvent":"Pentane","concentration_mg_ml":"14.99","molecular_weight":"9000-10000","supplier":"Sigma","solubility_class":"Partially soluble","transmission_10C":"36","transmission_25C":"39","transmission_60C":"22","cloud_point_C":"","method":"Experiment","conditions":"14.99 mg/mL, 10-60 °C, 0.5 °C/min","conditions_detail":"Crystal16 turbidity (645 nm), cooling ramp 60 to 10 °C at 0.5 °C/min after two heat/cool cycles; holds 120 min at 10 °C and 60 min at 60 and 25 °C; stirring 900 rpm. Sample: 14.99 mg/mL polymer, Mn 9000-10000 g/mol (Sigma); solvent purity 98 %. Transmission binned per 1 °C (median of Savitzky-Golay filtered cooling-phase points, n=160); observed range 10-48 %. Class thresholds from the source paper: insoluble <10 %, soluble >85 %, partial 10-85 %. Nonequilibrium (0.5 °C/min).","doi":"10.1021/acs.jpcb.4c06500","comments":"Dextran in Pentane at 14.99 mg/mL is partially soluble: transmission between 10 and 85 % at some temperature on cooling. Class refers to nonequilibrium behaviour during the cooling ramp, not thermodynamic solubility. Data: Amrihesari et al., J. Phys. Chem. B 2024 (github.com/mona2442/Polymer-Solubility-Data_Crystal16)."}]}