{"count":97,"next":"http://glycodata.org/api/gdd/polymer-solubility/?format=json&page=4","previous":"http://glycodata.org/api/gdd/polymer-solubility/?format=json&page=2","results":[{"id":41,"polymer":"Chitosan","solvent":"Formamide","concentration_mg_ml":"14.99","molecular_weight":"15000","supplier":"Polysciences","solubility_class":"Insoluble","transmission_10C":"1","transmission_25C":"2","transmission_60C":"2","cloud_point_C":"","method":"Experiment","conditions":"14.99 mg/mL, 10-60 °C, 0.5 °C/min","conditions_detail":"Crystal16 turbidity (645 nm), cooling ramp 60 to 10 °C at 0.5 °C/min after two heat/cool cycles; holds 120 min at 10 °C and 60 min at 60 and 25 °C; stirring 900 rpm. Sample: 14.99 mg/mL polymer, Mn 15000 g/mol (Polysciences). Transmission binned per 1 °C (median of Savitzky-Golay filtered cooling-phase points, n=51); observed range 1-5 %. Class thresholds from the source paper: insoluble <10 %, soluble >85 %, partial 10-85 %. Nonequilibrium (0.5 °C/min).","doi":"10.1021/acs.jpcb.4c06500","comments":"Chitosan in Formamide at 14.99 mg/mL is insoluble: turbid (T < 10 %) over the whole 10-60 °C cooling ramp. Class refers to nonequilibrium behaviour during the cooling ramp, not thermodynamic solubility. Data: Amrihesari et al., J. Phys. Chem. B 2024 (github.com/mona2442/Polymer-Solubility-Data_Crystal16)."},{"id":42,"polymer":"Chitosan","solvent":"Heptane","concentration_mg_ml":"15.02","molecular_weight":"15000","supplier":"Polysciences","solubility_class":"Insoluble","transmission_10C":"3","transmission_25C":"4","transmission_60C":"4","cloud_point_C":"","method":"Experiment","conditions":"15.02 mg/mL, 10-60 °C, 0.5 °C/min","conditions_detail":"Crystal16 turbidity (645 nm), cooling ramp 60 to 10 °C at 0.5 °C/min after two heat/cool cycles; holds 120 min at 10 °C and 60 min at 60 and 25 °C; stirring 900 rpm. Sample: 15.02 mg/mL polymer, Mn 15000 g/mol (Polysciences); solvent purity 99 %. Transmission binned per 1 °C (median of Savitzky-Golay filtered cooling-phase points, n=50); observed range 3-4 %. Class thresholds from the source paper: insoluble <10 %, soluble >85 %, partial 10-85 %. Nonequilibrium (0.5 °C/min).","doi":"10.1021/acs.jpcb.4c06500","comments":"Chitosan in Heptane at 15.02 mg/mL is insoluble: turbid (T < 10 %) over the whole 10-60 °C cooling ramp. Class refers to nonequilibrium behaviour during the cooling ramp, not thermodynamic solubility. Data: Amrihesari et al., J. Phys. Chem. B 2024 (github.com/mona2442/Polymer-Solubility-Data_Crystal16)."},{"id":43,"polymer":"Chitosan","solvent":"Isobutyl acetate","concentration_mg_ml":"14.9","molecular_weight":"15000","supplier":"Polysciences","solubility_class":"Insoluble","transmission_10C":"1","transmission_25C":"1","transmission_60C":"1","cloud_point_C":"","method":"Experiment","conditions":"14.9 mg/mL, 10-60 °C, 0.5 °C/min","conditions_detail":"Crystal16 turbidity (645 nm), cooling ramp 60 to 10 °C at 0.5 °C/min after two heat/cool cycles; holds 120 min at 10 °C and 60 min at 60 and 25 °C; stirring 900 rpm. Sample: 14.9 mg/mL polymer, Mn 15000 g/mol (Polysciences); solvent purity 99 %. Transmission binned per 1 °C (median of Savitzky-Golay filtered cooling-phase points, n=50); observed range 1-1 %. Class thresholds from the source paper: insoluble <10 %, soluble >85 %, partial 10-85 %. Nonequilibrium (0.5 °C/min).","doi":"10.1021/acs.jpcb.4c06500","comments":"Chitosan in Isobutyl acetate at 14.9 mg/mL is insoluble: turbid (T < 10 %) over the whole 10-60 °C cooling ramp. Class refers to nonequilibrium behaviour during the cooling ramp, not thermodynamic solubility. Data: Amrihesari et al., J. Phys. Chem. B 2024 (github.com/mona2442/Polymer-Solubility-Data_Crystal16)."},{"id":44,"polymer":"Chitosan","solvent":"Petroleum ether","concentration_mg_ml":"14.94","molecular_weight":"15000","supplier":"Polysciences","solubility_class":"Insoluble","transmission_10C":"3","transmission_25C":"4","transmission_60C":"5","cloud_point_C":"","method":"Experiment","conditions":"14.94 mg/mL, 10-60 °C, 0.5 °C/min","conditions_detail":"Crystal16 turbidity (645 nm), cooling ramp 60 to 10 °C at 0.5 °C/min after two heat/cool cycles; holds 120 min at 10 °C and 60 min at 60 and 25 °C; stirring 900 rpm. Sample: 14.94 mg/mL polymer, Mn 15000 g/mol (Polysciences). Transmission binned per 1 °C (median of Savitzky-Golay filtered cooling-phase points, n=51); observed range 3-5 %. Class thresholds from the source paper: insoluble <10 %, soluble >85 %, partial 10-85 %. Nonequilibrium (0.5 °C/min).","doi":"10.1021/acs.jpcb.4c06500","comments":"Chitosan in Petroleum ether at 14.94 mg/mL is insoluble: turbid (T < 10 %) over the whole 10-60 °C cooling ramp. Class refers to nonequilibrium behaviour during the cooling ramp, not thermodynamic solubility. Data: Amrihesari et al., J. Phys. Chem. B 2024 (github.com/mona2442/Polymer-Solubility-Data_Crystal16)."},{"id":45,"polymer":"Chitosan","solvent":"Pyridine","concentration_mg_ml":"15.72","molecular_weight":"15000","supplier":"Polysciences","solubility_class":"Partially soluble","transmission_10C":"21","transmission_25C":"16","transmission_60C":"10","cloud_point_C":"","method":"Experiment","conditions":"15.72 mg/mL, 10-60 °C, 0.5 °C/min","conditions_detail":"Crystal16 turbidity (645 nm), cooling ramp 60 to 10 °C at 0.5 °C/min after two heat/cool cycles; holds 120 min at 10 °C and 60 min at 60 and 25 °C; stirring 900 rpm. Sample: 15.72 mg/mL polymer, Mn 15000 g/mol (Polysciences); solvent purity 99 %. Transmission binned per 1 °C (median of Savitzky-Golay filtered cooling-phase points, n=202); observed range 10-21 %. Class thresholds from the source paper: insoluble <10 %, soluble >85 %, partial 10-85 %. Nonequilibrium (0.5 °C/min).","doi":"10.1021/acs.jpcb.4c06500","comments":"Chitosan in Pyridine at 15.72 mg/mL is partially soluble: transmission between 10 and 85 % at some temperature on cooling. Class refers to nonequilibrium behaviour during the cooling ramp, not thermodynamic solubility. Data: Amrihesari et al., J. Phys. Chem. B 2024 (github.com/mona2442/Polymer-Solubility-Data_Crystal16)."},{"id":46,"polymer":"Chitosan","solvent":"Carbon disulfide","concentration_mg_ml":"14.97","molecular_weight":"15000","supplier":"Polysciences","solubility_class":"Partially soluble","transmission_10C":"11","transmission_25C":"13","transmission_60C":"27","cloud_point_C":"","method":"Experiment","conditions":"14.97 mg/mL, 10-60 °C, 0.5 °C/min","conditions_detail":"Crystal16 turbidity (645 nm), cooling ramp 60 to 10 °C at 0.5 °C/min after two heat/cool cycles; holds 120 min at 10 °C and 60 min at 60 and 25 °C; stirring 900 rpm. Sample: 14.97 mg/mL polymer, Mn 15000 g/mol (Polysciences); solvent purity 99.5 %. Transmission binned per 1 °C (median of Savitzky-Golay filtered cooling-phase points, n=210); observed range 11-28 %. Class thresholds from the source paper: insoluble <10 %, soluble >85 %, partial 10-85 %. Nonequilibrium (0.5 °C/min).","doi":"10.1021/acs.jpcb.4c06500","comments":"Chitosan in Carbon disulfide at 14.97 mg/mL is partially soluble: transmission between 10 and 85 % at some temperature on cooling. Class refers to nonequilibrium behaviour during the cooling ramp, not thermodynamic solubility. Data: Amrihesari et al., J. Phys. Chem. B 2024 (github.com/mona2442/Polymer-Solubility-Data_Crystal16)."},{"id":47,"polymer":"Chitosan","solvent":"m-cresol","concentration_mg_ml":"15.14","molecular_weight":"15000","supplier":"Polysciences","solubility_class":"Partially soluble","transmission_10C":"","transmission_25C":"50","transmission_60C":"44","cloud_point_C":"","method":"Experiment","conditions":"15.14 mg/mL, 10-60 °C, 0.5 °C/min","conditions_detail":"Crystal16 turbidity (645 nm), cooling ramp 60 to 10 °C at 0.5 °C/min after two heat/cool cycles; holds 120 min at 10 °C and 60 min at 60 and 25 °C; stirring 900 rpm. Sample: 15.14 mg/mL polymer, Mn 15000 g/mol (Polysciences); solvent purity 99 %. Transmission binned per 1 °C (median of Savitzky-Golay filtered cooling-phase points, n=184); observed range 44-84 %. Class thresholds from the source paper: insoluble <10 %, soluble >85 %, partial 10-85 %. Nonequilibrium (0.5 °C/min).","doi":"10.1021/acs.jpcb.4c06500","comments":"Chitosan in m-cresol at 15.14 mg/mL is partially soluble: transmission between 10 and 85 % at some temperature on cooling. Class refers to nonequilibrium behaviour during the cooling ramp, not thermodynamic solubility. Data: Amrihesari et al., J. Phys. Chem. B 2024 (github.com/mona2442/Polymer-Solubility-Data_Crystal16)."},{"id":48,"polymer":"Chitosan","solvent":"n-Butanol","concentration_mg_ml":"49.97","molecular_weight":"15000","supplier":"Polysciences","solubility_class":"Insoluble","transmission_10C":"0","transmission_25C":"0","transmission_60C":"0","cloud_point_C":"","method":"Experiment","conditions":"49.97 mg/mL, 10-60 °C, 0.5 °C/min","conditions_detail":"Crystal16 turbidity (645 nm), cooling ramp 60 to 10 °C at 0.5 °C/min after two heat/cool cycles; holds 120 min at 10 °C and 60 min at 60 and 25 °C; stirring 900 rpm. Sample: 49.97 mg/mL polymer, Mn 15000 g/mol (Polysciences); solvent purity 99.4 %. Transmission binned per 1 °C (median of Savitzky-Golay filtered cooling-phase points, n=51); observed range 0-0 %. Class thresholds from the source paper: insoluble <10 %, soluble >85 %, partial 10-85 %. Nonequilibrium (0.5 °C/min).","doi":"10.1021/acs.jpcb.4c06500","comments":"Chitosan in n-Butanol at 49.97 mg/mL is insoluble: turbid (T < 10 %) over the whole 10-60 °C cooling ramp. Class refers to nonequilibrium behaviour during the cooling ramp, not thermodynamic solubility. Data: Amrihesari et al., J. Phys. Chem. B 2024 (github.com/mona2442/Polymer-Solubility-Data_Crystal16)."},{"id":49,"polymer":"Chitosan","solvent":"n-Butanol","concentration_mg_ml":"5.22","molecular_weight":"15000","supplier":"Polysciences","solubility_class":"Partially soluble","transmission_10C":"9","transmission_25C":"10","transmission_60C":"12","cloud_point_C":"","method":"Experiment","conditions":"5.22 mg/mL, 10-60 °C, 0.5 °C/min","conditions_detail":"Crystal16 turbidity (645 nm), cooling ramp 60 to 10 °C at 0.5 °C/min after two heat/cool cycles; holds 120 min at 10 °C and 60 min at 60 and 25 °C; stirring 900 rpm. Sample: 5.22 mg/mL polymer, Mn 15000 g/mol (Polysciences); solvent purity 99.4 %. Transmission binned per 1 °C (median of Savitzky-Golay filtered cooling-phase points, n=194); observed range 9-13 %. Class thresholds from the source paper: insoluble <10 %, soluble >85 %, partial 10-85 %. Nonequilibrium (0.5 °C/min).","doi":"10.1021/acs.jpcb.4c06500","comments":"Chitosan in n-Butanol at 5.22 mg/mL is partially soluble: transmission between 10 and 85 % at some temperature on cooling. Class refers to nonequilibrium behaviour during the cooling ramp, not thermodynamic solubility. Data: Amrihesari et al., J. Phys. Chem. B 2024 (github.com/mona2442/Polymer-Solubility-Data_Crystal16)."},{"id":50,"polymer":"Chitosan","solvent":"Styrene","concentration_mg_ml":"14.92","molecular_weight":"15000","supplier":"Polysciences","solubility_class":"Partially soluble","transmission_10C":"48","transmission_25C":"66","transmission_60C":"49","cloud_point_C":"","method":"Experiment","conditions":"14.92 mg/mL, 10-60 °C, 0.5 °C/min","conditions_detail":"Crystal16 turbidity (645 nm), cooling ramp 60 to 10 °C at 0.5 °C/min after two heat/cool cycles; holds 120 min at 10 °C and 60 min at 60 and 25 °C; stirring 900 rpm. Sample: 14.92 mg/mL polymer, Mn 15000 g/mol (Polysciences). Transmission binned per 1 °C (median of Savitzky-Golay filtered cooling-phase points, n=210); observed range 48-71 %. Class thresholds from the source paper: insoluble <10 %, soluble >85 %, partial 10-85 %. Nonequilibrium (0.5 °C/min).","doi":"10.1021/acs.jpcb.4c06500","comments":"Chitosan in Styrene at 14.92 mg/mL is partially soluble: transmission between 10 and 85 % at some temperature on cooling. Class refers to nonequilibrium behaviour during the cooling ramp, not thermodynamic solubility. Data: Amrihesari et al., J. Phys. Chem. B 2024 (github.com/mona2442/Polymer-Solubility-Data_Crystal16)."},{"id":51,"polymer":"Dextran","solvent":"1,4-dioxane","concentration_mg_ml":"14.9","molecular_weight":"9000-10000","supplier":"Sigma","solubility_class":"Insoluble","transmission_10C":"0","transmission_25C":"2","transmission_60C":"1","cloud_point_C":"","method":"Experiment","conditions":"14.9 mg/mL, 10-60 °C, 0.5 °C/min","conditions_detail":"Crystal16 turbidity (645 nm), cooling ramp 60 to 10 °C at 0.5 °C/min after two heat/cool cycles; holds 120 min at 10 °C and 60 min at 60 and 25 °C; stirring 900 rpm. Sample: 14.9 mg/mL polymer, Mn 9000-10000 g/mol (Sigma); solvent purity 99.8 %. Transmission binned per 1 °C (median of Savitzky-Golay filtered cooling-phase points, n=51); observed range 0-2 %. Class thresholds from the source paper: insoluble <10 %, soluble >85 %, partial 10-85 %. Nonequilibrium (0.5 °C/min).","doi":"10.1021/acs.jpcb.4c06500","comments":"Dextran in 1,4-dioxane at 14.9 mg/mL is insoluble: turbid (T < 10 %) over the whole 10-60 °C cooling ramp. Class refers to nonequilibrium behaviour during the cooling ramp, not thermodynamic solubility. Data: Amrihesari et al., J. Phys. Chem. B 2024 (github.com/mona2442/Polymer-Solubility-Data_Crystal16)."},{"id":52,"polymer":"Dextran","solvent":"1-Octanol","concentration_mg_ml":"15.02","molecular_weight":"9000-10000","supplier":"Sigma","solubility_class":"Partially soluble","transmission_10C":"1","transmission_25C":"2","transmission_60C":"2","cloud_point_C":"","method":"Experiment","conditions":"15.02 mg/mL, 10-60 °C, 0.5 °C/min","conditions_detail":"Crystal16 turbidity (645 nm), cooling ramp 60 to 10 °C at 0.5 °C/min after two heat/cool cycles; holds 120 min at 10 °C and 60 min at 60 and 25 °C; stirring 900 rpm. Sample: 15.02 mg/mL polymer, Mn 9000-10000 g/mol (Sigma); solvent purity 99 %. Transmission binned per 1 °C (median of Savitzky-Golay filtered cooling-phase points, n=53); observed range 1-59 %. Class thresholds from the source paper: insoluble <10 %, soluble >85 %, partial 10-85 %. Nonequilibrium (0.5 °C/min).","doi":"10.1021/acs.jpcb.4c06500","comments":"Dextran in 1-Octanol at 15.02 mg/mL is partially soluble: transmission between 10 and 85 % at some temperature on cooling. Class refers to nonequilibrium behaviour during the cooling ramp, not thermodynamic solubility. Data: Amrihesari et al., J. Phys. Chem. B 2024 (github.com/mona2442/Polymer-Solubility-Data_Crystal16)."},{"id":53,"polymer":"Dextran","solvent":"2,4,6-trimethylpyridine","concentration_mg_ml":"15","molecular_weight":"9000-10000","supplier":"Sigma","solubility_class":"Partially soluble","transmission_10C":"12","transmission_25C":"9","transmission_60C":"2","cloud_point_C":"","method":"Experiment","conditions":"15 mg/mL, 10-60 °C, 0.5 °C/min","conditions_detail":"Crystal16 turbidity (645 nm), cooling ramp 60 to 10 °C at 0.5 °C/min after two heat/cool cycles; holds 120 min at 10 °C and 60 min at 60 and 25 °C; stirring 900 rpm. Sample: 15 mg/mL polymer, Mn 9000-10000 g/mol (Sigma); solvent purity 99 %. Transmission binned per 1 °C (median of Savitzky-Golay filtered cooling-phase points, n=77); observed range 2-12 %. Class thresholds from the source paper: insoluble <10 %, soluble >85 %, partial 10-85 %. Nonequilibrium (0.5 °C/min).","doi":"10.1021/acs.jpcb.4c06500","comments":"Dextran in 2,4,6-trimethylpyridine at 15 mg/mL is partially soluble: transmission between 10 and 85 % at some temperature on cooling. Class refers to nonequilibrium behaviour during the cooling ramp, not thermodynamic solubility. Data: Amrihesari et al., J. Phys. Chem. B 2024 (github.com/mona2442/Polymer-Solubility-Data_Crystal16)."},{"id":54,"polymer":"Dextran","solvent":"2,4,6-trimethylpyridine","concentration_mg_ml":"15.04","molecular_weight":"9000-10000","supplier":"Sigma","solubility_class":"Partially soluble","transmission_10C":"13","transmission_25C":"9","transmission_60C":"3","cloud_point_C":"","method":"Experiment","conditions":"15.04 mg/mL, 10-60 °C, 0.5 °C/min","conditions_detail":"Crystal16 turbidity (645 nm), cooling ramp 60 to 10 °C at 0.5 °C/min after two heat/cool cycles; holds 120 min at 10 °C and 60 min at 60 and 25 °C; stirring 900 rpm. Sample: 15.04 mg/mL polymer, Mn 9000-10000 g/mol (Sigma); solvent purity 99 %. Transmission binned per 1 °C (median of Savitzky-Golay filtered cooling-phase points, n=78); observed range 3-13 %. Class thresholds from the source paper: insoluble <10 %, soluble >85 %, partial 10-85 %. Nonequilibrium (0.5 °C/min).","doi":"10.1021/acs.jpcb.4c06500","comments":"Dextran in 2,4,6-trimethylpyridine at 15.04 mg/mL is partially soluble: transmission between 10 and 85 % at some temperature on cooling. Class refers to nonequilibrium behaviour during the cooling ramp, not thermodynamic solubility. Data: Amrihesari et al., J. Phys. Chem. B 2024 (github.com/mona2442/Polymer-Solubility-Data_Crystal16)."},{"id":55,"polymer":"Dextran","solvent":"Anisole","concentration_mg_ml":"14.31","molecular_weight":"9000-10000","supplier":"Sigma","solubility_class":"Partially soluble","transmission_10C":"","transmission_25C":"63","transmission_60C":"23","cloud_point_C":"","method":"Experiment","conditions":"14.31 mg/mL, 10-60 °C, 0.5 °C/min","conditions_detail":"Crystal16 turbidity (645 nm), cooling ramp 60 to 10 °C at 0.5 °C/min after two heat/cool cycles; holds 120 min at 10 °C and 60 min at 60 and 25 °C; stirring 900 rpm. Sample: 14.31 mg/mL polymer, Mn 9000-10000 g/mol (Sigma); solvent purity 99 %. Transmission binned per 1 °C (median of Savitzky-Golay filtered cooling-phase points, n=170); observed range 22-83 %. Class thresholds from the source paper: insoluble <10 %, soluble >85 %, partial 10-85 %. Nonequilibrium (0.5 °C/min).","doi":"10.1021/acs.jpcb.4c06500","comments":"Dextran in Anisole at 14.31 mg/mL is partially soluble: transmission between 10 and 85 % at some temperature on cooling. Class refers to nonequilibrium behaviour during the cooling ramp, not thermodynamic solubility. Data: Amrihesari et al., J. Phys. Chem. B 2024 (github.com/mona2442/Polymer-Solubility-Data_Crystal16)."},{"id":56,"polymer":"Dextran","solvent":"Benzene","concentration_mg_ml":"5.03","molecular_weight":"9000-10000","supplier":"Sigma","solubility_class":"Partially soluble","transmission_10C":"100","transmission_25C":"74","transmission_60C":"50","cloud_point_C":"","method":"Experiment","conditions":"5.03 mg/mL, 10-60 °C, 0.5 °C/min","conditions_detail":"Crystal16 turbidity (645 nm), cooling ramp 60 to 10 °C at 0.5 °C/min after two heat/cool cycles; holds 120 min at 10 °C and 60 min at 60 and 25 °C; stirring 900 rpm. Sample: 5.03 mg/mL polymer, Mn 9000-10000 g/mol (Sigma); solvent purity 99 %. Transmission binned per 1 °C (median of Savitzky-Golay filtered cooling-phase points, n=188); observed range 48-100 %. Class thresholds from the source paper: insoluble <10 %, soluble >85 %, partial 10-85 %. Nonequilibrium (0.5 °C/min).","doi":"10.1021/acs.jpcb.4c06500","comments":"Dextran in Benzene at 5.03 mg/mL is partially soluble: transmission between 10 and 85 % at some temperature on cooling. Class refers to nonequilibrium behaviour during the cooling ramp, not thermodynamic solubility. Data: Amrihesari et al., J. Phys. Chem. B 2024 (github.com/mona2442/Polymer-Solubility-Data_Crystal16)."},{"id":57,"polymer":"Dextran","solvent":"Benzene","concentration_mg_ml":"50.01","molecular_weight":"9000-10000","supplier":"Sigma","solubility_class":"Insoluble","transmission_10C":"","transmission_25C":"9","transmission_60C":"1","cloud_point_C":"","method":"Experiment","conditions":"50.01 mg/mL, 10-60 °C, 0.5 °C/min","conditions_detail":"Crystal16 turbidity (645 nm), cooling ramp 60 to 10 °C at 0.5 °C/min after two heat/cool cycles; holds 120 min at 10 °C and 60 min at 60 and 25 °C; stirring 900 rpm. Sample: 50.01 mg/mL polymer, Mn 9000-10000 g/mol (Sigma); solvent purity 99 %. Transmission binned per 1 °C (median of Savitzky-Golay filtered cooling-phase points, n=47); observed range 1-10 %. Class thresholds from the source paper: insoluble <10 %, soluble >85 %, partial 10-85 %. Nonequilibrium (0.5 °C/min).","doi":"10.1021/acs.jpcb.4c06500","comments":"Dextran in Benzene at 50.01 mg/mL is insoluble: turbid (T < 10 %) over the whole 10-60 °C cooling ramp. Class refers to nonequilibrium behaviour during the cooling ramp, not thermodynamic solubility. Data: Amrihesari et al., J. Phys. Chem. B 2024 (github.com/mona2442/Polymer-Solubility-Data_Crystal16)."},{"id":58,"polymer":"Dextran","solvent":"Benzyl alcohol","concentration_mg_ml":"15.12","molecular_weight":"9000-10000","supplier":"Sigma","solubility_class":"Partially soluble","transmission_10C":"66","transmission_25C":"67","transmission_60C":"40","cloud_point_C":"","method":"Experiment","conditions":"15.12 mg/mL, 10-60 °C, 0.5 °C/min","conditions_detail":"Crystal16 turbidity (645 nm), cooling ramp 60 to 10 °C at 0.5 °C/min after two heat/cool cycles; holds 120 min at 10 °C and 60 min at 60 and 25 °C; stirring 900 rpm. Sample: 15.12 mg/mL polymer, Mn 9000-10000 g/mol (Sigma); solvent purity 99 %. Transmission binned per 1 °C (median of Savitzky-Golay filtered cooling-phase points, n=205); observed range 39-89 %. Class thresholds from the source paper: insoluble <10 %, soluble >85 %, partial 10-85 %. Nonequilibrium (0.5 °C/min).","doi":"10.1021/acs.jpcb.4c06500","comments":"Dextran in Benzyl alcohol at 15.12 mg/mL is partially soluble: transmission between 10 and 85 % at some temperature on cooling. Class refers to nonequilibrium behaviour during the cooling ramp, not thermodynamic solubility. Data: Amrihesari et al., J. Phys. Chem. B 2024 (github.com/mona2442/Polymer-Solubility-Data_Crystal16)."},{"id":59,"polymer":"Dextran","solvent":"Chlorobenzene","concentration_mg_ml":"14.89","molecular_weight":"9000-10000","supplier":"Sigma","solubility_class":"Partially soluble","transmission_10C":"","transmission_25C":"79","transmission_60C":"27","cloud_point_C":"","method":"Experiment","conditions":"14.89 mg/mL, 10-60 °C, 0.5 °C/min","conditions_detail":"Crystal16 turbidity (645 nm), cooling ramp 60 to 10 °C at 0.5 °C/min after two heat/cool cycles; holds 120 min at 10 °C and 60 min at 60 and 25 °C; stirring 900 rpm. Sample: 14.89 mg/mL polymer, Mn 9000-10000 g/mol (Sigma); solvent purity 99 %. Transmission binned per 1 °C (median of Savitzky-Golay filtered cooling-phase points, n=138); observed range 26-83 %. Class thresholds from the source paper: insoluble <10 %, soluble >85 %, partial 10-85 %. Nonequilibrium (0.5 °C/min).","doi":"10.1021/acs.jpcb.4c06500","comments":"Dextran in Chlorobenzene at 14.89 mg/mL is partially soluble: transmission between 10 and 85 % at some temperature on cooling. Class refers to nonequilibrium behaviour during the cooling ramp, not thermodynamic solubility. Data: Amrihesari et al., J. Phys. Chem. B 2024 (github.com/mona2442/Polymer-Solubility-Data_Crystal16)."},{"id":60,"polymer":"Dextran","solvent":"Chloroform","concentration_mg_ml":"14.9","molecular_weight":"9000-10000","supplier":"Sigma","solubility_class":"Insoluble","transmission_10C":"4","transmission_25C":"3","transmission_60C":"1","cloud_point_C":"","method":"Experiment","conditions":"14.9 mg/mL, 10-60 °C, 0.5 °C/min","conditions_detail":"Crystal16 turbidity (645 nm), cooling ramp 60 to 10 °C at 0.5 °C/min after two heat/cool cycles; holds 120 min at 10 °C and 60 min at 60 and 25 °C; stirring 900 rpm. Sample: 14.9 mg/mL polymer, Mn 9000-10000 g/mol (Sigma); solvent purity 99.8 %. Transmission binned per 1 °C (median of Savitzky-Golay filtered cooling-phase points, n=51); observed range 1-4 %. Class thresholds from the source paper: insoluble <10 %, soluble >85 %, partial 10-85 %. Nonequilibrium (0.5 °C/min).","doi":"10.1021/acs.jpcb.4c06500","comments":"Dextran in Chloroform at 14.9 mg/mL is insoluble: turbid (T < 10 %) over the whole 10-60 °C cooling ramp. Class refers to nonequilibrium behaviour during the cooling ramp, not thermodynamic solubility. Data: Amrihesari et al., J. Phys. Chem. B 2024 (github.com/mona2442/Polymer-Solubility-Data_Crystal16)."}]}