{"count":97,"next":"http://glycodata.org/api/gdd/polymer-solubility/?format=json&page=3","previous":"http://glycodata.org/api/gdd/polymer-solubility/?format=json","results":[{"id":21,"polymer":"Cellulose acetate","solvent":"n-Hexane","concentration_mg_ml":"15","molecular_weight":"50000","supplier":"Sigma","solubility_class":"Partially soluble","transmission_10C":"100","transmission_25C":"69","transmission_60C":"11","cloud_point_C":"","method":"Experiment","conditions":"15 mg/mL, 10-60 °C, 0.5 °C/min","conditions_detail":"Crystal16 turbidity (645 nm), cooling ramp 60 to 10 °C at 0.5 °C/min after two heat/cool cycles; holds 120 min at 10 °C and 60 min at 60 and 25 °C; stirring 900 rpm. Sample: 15 mg/mL polymer, Mn 50000 g/mol (Sigma); solvent purity 99 %. Transmission binned per 1 °C (median of Savitzky-Golay filtered cooling-phase points, n=183); observed range 11-100 %. Class thresholds from the source paper: insoluble <10 %, soluble >85 %, partial 10-85 %. Nonequilibrium (0.5 °C/min).","doi":"10.1021/acs.jpcb.4c06500","comments":"Cellulose acetate in n-Hexane at 15 mg/mL is partially soluble: transmission between 10 and 85 % at some temperature on cooling. Class refers to nonequilibrium behaviour during the cooling ramp, not thermodynamic solubility. Data: Amrihesari et al., J. Phys. Chem. B 2024 (github.com/mona2442/Polymer-Solubility-Data_Crystal16)."},{"id":22,"polymer":"Chitosan","solvent":"1,2,4-trichlorobenzene","concentration_mg_ml":"14.52","molecular_weight":"15000","supplier":"Polysciences","solubility_class":"Partially soluble","transmission_10C":"19","transmission_25C":"25","transmission_60C":"48","cloud_point_C":"","method":"Experiment","conditions":"14.52 mg/mL, 10-60 °C, 0.5 °C/min","conditions_detail":"Crystal16 turbidity (645 nm), cooling ramp 60 to 10 °C at 0.5 °C/min after two heat/cool cycles; holds 120 min at 10 °C and 60 min at 60 and 25 °C; stirring 900 rpm. Sample: 14.52 mg/mL polymer, Mn 15000 g/mol (Polysciences). Transmission binned per 1 °C (median of Savitzky-Golay filtered cooling-phase points, n=210); observed range 19-48 %. Class thresholds from the source paper: insoluble <10 %, soluble >85 %, partial 10-85 %. Nonequilibrium (0.5 °C/min).","doi":"10.1021/acs.jpcb.4c06500","comments":"Chitosan in 1,2,4-trichlorobenzene at 14.52 mg/mL is partially soluble: transmission between 10 and 85 % at some temperature on cooling. Class refers to nonequilibrium behaviour during the cooling ramp, not thermodynamic solubility. Data: Amrihesari et al., J. Phys. Chem. B 2024 (github.com/mona2442/Polymer-Solubility-Data_Crystal16)."},{"id":23,"polymer":"Chitosan","solvent":"1-Octanol","concentration_mg_ml":"15.09","molecular_weight":"15000","supplier":"Polysciences","solubility_class":"Insoluble","transmission_10C":"1","transmission_25C":"1","transmission_60C":"1","cloud_point_C":"","method":"Experiment","conditions":"15.09 mg/mL, 10-60 °C, 0.5 °C/min","conditions_detail":"Crystal16 turbidity (645 nm), cooling ramp 60 to 10 °C at 0.5 °C/min after two heat/cool cycles; holds 120 min at 10 °C and 60 min at 60 and 25 °C; stirring 900 rpm. Sample: 15.09 mg/mL polymer, Mn 15000 g/mol (Polysciences); solvent purity 99 %. Transmission binned per 1 °C (median of Savitzky-Golay filtered cooling-phase points, n=51); observed range 1-1 %. Class thresholds from the source paper: insoluble <10 %, soluble >85 %, partial 10-85 %. Nonequilibrium (0.5 °C/min).","doi":"10.1021/acs.jpcb.4c06500","comments":"Chitosan in 1-Octanol at 15.09 mg/mL is insoluble: turbid (T < 10 %) over the whole 10-60 °C cooling ramp. Class refers to nonequilibrium behaviour during the cooling ramp, not thermodynamic solubility. Data: Amrihesari et al., J. Phys. Chem. B 2024 (github.com/mona2442/Polymer-Solubility-Data_Crystal16)."},{"id":24,"polymer":"Chitosan","solvent":"2,4,6-trimethylpyridine","concentration_mg_ml":"14.71","molecular_weight":"15000","supplier":"Polysciences","solubility_class":"Partially soluble","transmission_10C":"13","transmission_25C":"10","transmission_60C":"8","cloud_point_C":"","method":"Experiment","conditions":"14.71 mg/mL, 10-60 °C, 0.5 °C/min","conditions_detail":"Crystal16 turbidity (645 nm), cooling ramp 60 to 10 °C at 0.5 °C/min after two heat/cool cycles; holds 120 min at 10 °C and 60 min at 60 and 25 °C; stirring 900 rpm. Sample: 14.71 mg/mL polymer, Mn 15000 g/mol (Polysciences); solvent purity 99 %. Transmission binned per 1 °C (median of Savitzky-Golay filtered cooling-phase points, n=124); observed range 8-13 %. Class thresholds from the source paper: insoluble <10 %, soluble >85 %, partial 10-85 %. Nonequilibrium (0.5 °C/min).","doi":"10.1021/acs.jpcb.4c06500","comments":"Chitosan in 2,4,6-trimethylpyridine at 14.71 mg/mL is partially soluble: transmission between 10 and 85 % at some temperature on cooling. Class refers to nonequilibrium behaviour during the cooling ramp, not thermodynamic solubility. Data: Amrihesari et al., J. Phys. Chem. B 2024 (github.com/mona2442/Polymer-Solubility-Data_Crystal16)."},{"id":25,"polymer":"Chitosan","solvent":"Acetone","concentration_mg_ml":"15.13","molecular_weight":"15000","supplier":"Polysciences","solubility_class":"Insoluble","transmission_10C":"2","transmission_25C":"2","transmission_60C":"2","cloud_point_C":"","method":"Experiment","conditions":"15.13 mg/mL, 10-60 °C, 0.5 °C/min","conditions_detail":"Crystal16 turbidity (645 nm), cooling ramp 60 to 10 °C at 0.5 °C/min after two heat/cool cycles; holds 120 min at 10 °C and 60 min at 60 and 25 °C; stirring 900 rpm. Sample: 15.13 mg/mL polymer, Mn 15000 g/mol (Polysciences); solvent purity 99.5 %. Transmission binned per 1 °C (median of Savitzky-Golay filtered cooling-phase points, n=51); observed range 2-2 %. Class thresholds from the source paper: insoluble <10 %, soluble >85 %, partial 10-85 %. Nonequilibrium (0.5 °C/min).","doi":"10.1021/acs.jpcb.4c06500","comments":"Chitosan in Acetone at 15.13 mg/mL is insoluble: turbid (T < 10 %) over the whole 10-60 °C cooling ramp. Class refers to nonequilibrium behaviour during the cooling ramp, not thermodynamic solubility. Data: Amrihesari et al., J. Phys. Chem. B 2024 (github.com/mona2442/Polymer-Solubility-Data_Crystal16)."},{"id":26,"polymer":"Chitosan","solvent":"Acetonitrile","concentration_mg_ml":"15.32","molecular_weight":"15000","supplier":"Polysciences","solubility_class":"Insoluble","transmission_10C":"1","transmission_25C":"1","transmission_60C":"1","cloud_point_C":"","method":"Experiment","conditions":"15.32 mg/mL, 10-60 °C, 0.5 °C/min","conditions_detail":"Crystal16 turbidity (645 nm), cooling ramp 60 to 10 °C at 0.5 °C/min after two heat/cool cycles; holds 120 min at 10 °C and 60 min at 60 and 25 °C; stirring 900 rpm. Sample: 15.32 mg/mL polymer, Mn 15000 g/mol (Polysciences); solvent purity 99.5 %. Transmission binned per 1 °C (median of Savitzky-Golay filtered cooling-phase points, n=51); observed range 1-1 %. Class thresholds from the source paper: insoluble <10 %, soluble >85 %, partial 10-85 %. Nonequilibrium (0.5 °C/min).","doi":"10.1021/acs.jpcb.4c06500","comments":"Chitosan in Acetonitrile at 15.32 mg/mL is insoluble: turbid (T < 10 %) over the whole 10-60 °C cooling ramp. Class refers to nonequilibrium behaviour during the cooling ramp, not thermodynamic solubility. Data: Amrihesari et al., J. Phys. Chem. B 2024 (github.com/mona2442/Polymer-Solubility-Data_Crystal16)."},{"id":27,"polymer":"Chitosan","solvent":"Anisole","concentration_mg_ml":"5.02","molecular_weight":"15000","supplier":"Polysciences","solubility_class":"Partially soluble","transmission_10C":"100","transmission_25C":"83","transmission_60C":"65","cloud_point_C":"","method":"Experiment","conditions":"5.02 mg/mL, 10-60 °C, 0.5 °C/min","conditions_detail":"Crystal16 turbidity (645 nm), cooling ramp 60 to 10 °C at 0.5 °C/min after two heat/cool cycles; holds 120 min at 10 °C and 60 min at 60 and 25 °C; stirring 900 rpm. Sample: 5.02 mg/mL polymer, Mn 15000 g/mol (Polysciences); solvent purity 99 %. Transmission binned per 1 °C (median of Savitzky-Golay filtered cooling-phase points, n=158); observed range 65-100 %. Class thresholds from the source paper: insoluble <10 %, soluble >85 %, partial 10-85 %. Nonequilibrium (0.5 °C/min).","doi":"10.1021/acs.jpcb.4c06500","comments":"Chitosan in Anisole at 5.02 mg/mL is partially soluble: transmission between 10 and 85 % at some temperature on cooling. Class refers to nonequilibrium behaviour during the cooling ramp, not thermodynamic solubility. Data: Amrihesari et al., J. Phys. Chem. B 2024 (github.com/mona2442/Polymer-Solubility-Data_Crystal16)."},{"id":28,"polymer":"Chitosan","solvent":"Anisole","concentration_mg_ml":"50.01","molecular_weight":"15000","supplier":"Polysciences","solubility_class":"Insoluble","transmission_10C":"9","transmission_25C":"5","transmission_60C":"1","cloud_point_C":"","method":"Experiment","conditions":"50.01 mg/mL, 10-60 °C, 0.5 °C/min","conditions_detail":"Crystal16 turbidity (645 nm), cooling ramp 60 to 10 °C at 0.5 °C/min after two heat/cool cycles; holds 120 min at 10 °C and 60 min at 60 and 25 °C; stirring 900 rpm. Sample: 50.01 mg/mL polymer, Mn 15000 g/mol (Polysciences); solvent purity 99 %. Transmission binned per 1 °C (median of Savitzky-Golay filtered cooling-phase points, n=51); observed range 1-9 %. Class thresholds from the source paper: insoluble <10 %, soluble >85 %, partial 10-85 %. Nonequilibrium (0.5 °C/min).","doi":"10.1021/acs.jpcb.4c06500","comments":"Chitosan in Anisole at 50.01 mg/mL is insoluble: turbid (T < 10 %) over the whole 10-60 °C cooling ramp. Class refers to nonequilibrium behaviour during the cooling ramp, not thermodynamic solubility. Data: Amrihesari et al., J. Phys. Chem. B 2024 (github.com/mona2442/Polymer-Solubility-Data_Crystal16)."},{"id":29,"polymer":"Chitosan","solvent":"Benzyl alcohol","concentration_mg_ml":"14.49","molecular_weight":"15000","supplier":"Polysciences","solubility_class":"Partially soluble","transmission_10C":"49","transmission_25C":"49","transmission_60C":"32","cloud_point_C":"","method":"Experiment","conditions":"14.49 mg/mL, 10-60 °C, 0.5 °C/min","conditions_detail":"Crystal16 turbidity (645 nm), cooling ramp 60 to 10 °C at 0.5 °C/min after two heat/cool cycles; holds 120 min at 10 °C and 60 min at 60 and 25 °C; stirring 900 rpm. Sample: 14.49 mg/mL polymer, Mn 15000 g/mol (Polysciences); solvent purity 99 %. Transmission binned per 1 °C (median of Savitzky-Golay filtered cooling-phase points, n=210); observed range 32-53 %. Class thresholds from the source paper: insoluble <10 %, soluble >85 %, partial 10-85 %. Nonequilibrium (0.5 °C/min).","doi":"10.1021/acs.jpcb.4c06500","comments":"Chitosan in Benzyl alcohol at 14.49 mg/mL is partially soluble: transmission between 10 and 85 % at some temperature on cooling. Class refers to nonequilibrium behaviour during the cooling ramp, not thermodynamic solubility. Data: Amrihesari et al., J. Phys. Chem. B 2024 (github.com/mona2442/Polymer-Solubility-Data_Crystal16)."},{"id":30,"polymer":"Chitosan","solvent":"Chlorobenzene","concentration_mg_ml":"4.99","molecular_weight":"15000","supplier":"Polysciences","solubility_class":"Partially soluble","transmission_10C":"98","transmission_25C":"84","transmission_60C":"65","cloud_point_C":"","method":"Experiment","conditions":"4.99 mg/mL, 10-60 °C, 0.5 °C/min","conditions_detail":"Crystal16 turbidity (645 nm), cooling ramp 60 to 10 °C at 0.5 °C/min after two heat/cool cycles; holds 120 min at 10 °C and 60 min at 60 and 25 °C; stirring 900 rpm. Sample: 4.99 mg/mL polymer, Mn 15000 g/mol (Polysciences); solvent purity 99 %. Transmission binned per 1 °C (median of Savitzky-Golay filtered cooling-phase points, n=157); observed range 64-98 %. Class thresholds from the source paper: insoluble <10 %, soluble >85 %, partial 10-85 %. Nonequilibrium (0.5 °C/min).","doi":"10.1021/acs.jpcb.4c06500","comments":"Chitosan in Chlorobenzene at 4.99 mg/mL is partially soluble: transmission between 10 and 85 % at some temperature on cooling. Class refers to nonequilibrium behaviour during the cooling ramp, not thermodynamic solubility. Data: Amrihesari et al., J. Phys. Chem. B 2024 (github.com/mona2442/Polymer-Solubility-Data_Crystal16)."},{"id":31,"polymer":"Chitosan","solvent":"Chlorobenzene","concentration_mg_ml":"50.02","molecular_weight":"15000","supplier":"Polysciences","solubility_class":"Partially soluble","transmission_10C":"15","transmission_25C":"10","transmission_60C":"2","cloud_point_C":"","method":"Experiment","conditions":"50.02 mg/mL, 10-60 °C, 0.5 °C/min","conditions_detail":"Crystal16 turbidity (645 nm), cooling ramp 60 to 10 °C at 0.5 °C/min after two heat/cool cycles; holds 120 min at 10 °C and 60 min at 60 and 25 °C; stirring 900 rpm. Sample: 50.02 mg/mL polymer, Mn 15000 g/mol (Polysciences); solvent purity 99 %. Transmission binned per 1 °C (median of Savitzky-Golay filtered cooling-phase points, n=102); observed range 2-68 %. Class thresholds from the source paper: insoluble <10 %, soluble >85 %, partial 10-85 %. Nonequilibrium (0.5 °C/min).","doi":"10.1021/acs.jpcb.4c06500","comments":"Chitosan in Chlorobenzene at 50.02 mg/mL is partially soluble: transmission between 10 and 85 % at some temperature on cooling. Class refers to nonequilibrium behaviour during the cooling ramp, not thermodynamic solubility. Data: Amrihesari et al., J. Phys. Chem. B 2024 (github.com/mona2442/Polymer-Solubility-Data_Crystal16)."},{"id":32,"polymer":"Chitosan","solvent":"Chloroform","concentration_mg_ml":"15.04","molecular_weight":"15000","supplier":"Polysciences","solubility_class":"Insoluble","transmission_10C":"5","transmission_25C":"4","transmission_60C":"2","cloud_point_C":"","method":"Experiment","conditions":"15.04 mg/mL, 10-60 °C, 0.5 °C/min","conditions_detail":"Crystal16 turbidity (645 nm), cooling ramp 60 to 10 °C at 0.5 °C/min after two heat/cool cycles; holds 120 min at 10 °C and 60 min at 60 and 25 °C; stirring 900 rpm. Sample: 15.04 mg/mL polymer, Mn 15000 g/mol (Polysciences); solvent purity 99.8 %. Transmission binned per 1 °C (median of Savitzky-Golay filtered cooling-phase points, n=51); observed range 2-5 %. Class thresholds from the source paper: insoluble <10 %, soluble >85 %, partial 10-85 %. Nonequilibrium (0.5 °C/min).","doi":"10.1021/acs.jpcb.4c06500","comments":"Chitosan in Chloroform at 15.04 mg/mL is insoluble: turbid (T < 10 %) over the whole 10-60 °C cooling ramp. Class refers to nonequilibrium behaviour during the cooling ramp, not thermodynamic solubility. Data: Amrihesari et al., J. Phys. Chem. B 2024 (github.com/mona2442/Polymer-Solubility-Data_Crystal16)."},{"id":33,"polymer":"Chitosan","solvent":"Cyclohexane","concentration_mg_ml":"15.03","molecular_weight":"15000","supplier":"Polysciences","solubility_class":"Insoluble","transmission_10C":"3","transmission_25C":"3","transmission_60C":"3","cloud_point_C":"","method":"Experiment","conditions":"15.03 mg/mL, 10-60 °C, 0.5 °C/min","conditions_detail":"Crystal16 turbidity (645 nm), cooling ramp 60 to 10 °C at 0.5 °C/min after two heat/cool cycles; holds 120 min at 10 °C and 60 min at 60 and 25 °C; stirring 900 rpm. Sample: 15.03 mg/mL polymer, Mn 15000 g/mol (Polysciences); solvent purity 99.5 %. Transmission binned per 1 °C (median of Savitzky-Golay filtered cooling-phase points, n=51); observed range 3-3 %. Class thresholds from the source paper: insoluble <10 %, soluble >85 %, partial 10-85 %. Nonequilibrium (0.5 °C/min).","doi":"10.1021/acs.jpcb.4c06500","comments":"Chitosan in Cyclohexane at 15.03 mg/mL is insoluble: turbid (T < 10 %) over the whole 10-60 °C cooling ramp. Class refers to nonequilibrium behaviour during the cooling ramp, not thermodynamic solubility. Data: Amrihesari et al., J. Phys. Chem. B 2024 (github.com/mona2442/Polymer-Solubility-Data_Crystal16)."},{"id":34,"polymer":"Chitosan","solvent":"DMF","concentration_mg_ml":"15.17","molecular_weight":"15000","supplier":"Polysciences","solubility_class":"Insoluble","transmission_10C":"2","transmission_25C":"1","transmission_60C":"1","cloud_point_C":"","method":"Experiment","conditions":"15.17 mg/mL, 10-60 °C, 0.5 °C/min","conditions_detail":"Crystal16 turbidity (645 nm), cooling ramp 60 to 10 °C at 0.5 °C/min after two heat/cool cycles; holds 120 min at 10 °C and 60 min at 60 and 25 °C; stirring 900 rpm. Sample: 15.17 mg/mL polymer, Mn 15000 g/mol (Polysciences); solvent purity 99.8 %. Transmission binned per 1 °C (median of Savitzky-Golay filtered cooling-phase points, n=51); observed range 1-2 %. Class thresholds from the source paper: insoluble <10 %, soluble >85 %, partial 10-85 %. Nonequilibrium (0.5 °C/min).","doi":"10.1021/acs.jpcb.4c06500","comments":"Chitosan in DMF at 15.17 mg/mL is insoluble: turbid (T < 10 %) over the whole 10-60 °C cooling ramp. Class refers to nonequilibrium behaviour during the cooling ramp, not thermodynamic solubility. Data: Amrihesari et al., J. Phys. Chem. B 2024 (github.com/mona2442/Polymer-Solubility-Data_Crystal16)."},{"id":35,"polymer":"Chitosan","solvent":"DMSO","concentration_mg_ml":"14.96","molecular_weight":"15000","supplier":"Polysciences","solubility_class":"Insoluble","transmission_10C":"0","transmission_25C":"4","transmission_60C":"4","cloud_point_C":"","method":"Experiment","conditions":"14.96 mg/mL, 10-60 °C, 0.5 °C/min","conditions_detail":"Crystal16 turbidity (645 nm), cooling ramp 60 to 10 °C at 0.5 °C/min after two heat/cool cycles; holds 120 min at 10 °C and 60 min at 60 and 25 °C; stirring 900 rpm. Sample: 14.96 mg/mL polymer, Mn 15000 g/mol (Polysciences); solvent purity 99.9 %. Transmission binned per 1 °C (median of Savitzky-Golay filtered cooling-phase points, n=51); observed range 0-5 %. Class thresholds from the source paper: insoluble <10 %, soluble >85 %, partial 10-85 %. Nonequilibrium (0.5 °C/min).","doi":"10.1021/acs.jpcb.4c06500","comments":"Chitosan in DMSO at 14.96 mg/mL is insoluble: turbid (T < 10 %) over the whole 10-60 °C cooling ramp. Class refers to nonequilibrium behaviour during the cooling ramp, not thermodynamic solubility. Data: Amrihesari et al., J. Phys. Chem. B 2024 (github.com/mona2442/Polymer-Solubility-Data_Crystal16)."},{"id":36,"polymer":"Chitosan","solvent":"Diethyl ether","concentration_mg_ml":"5.03","molecular_weight":"15000","supplier":"Polysciences","solubility_class":"Partially soluble","transmission_10C":"22","transmission_25C":"24","transmission_60C":"31","cloud_point_C":"","method":"Experiment","conditions":"5.03 mg/mL, 10-60 °C, 0.5 °C/min","conditions_detail":"Crystal16 turbidity (645 nm), cooling ramp 60 to 10 °C at 0.5 °C/min after two heat/cool cycles; holds 120 min at 10 °C and 60 min at 60 and 25 °C; stirring 900 rpm. Sample: 5.03 mg/mL polymer, Mn 15000 g/mol (Polysciences); solvent purity 99.8 %. Transmission binned per 1 °C (median of Savitzky-Golay filtered cooling-phase points, n=210); observed range 22-32 %. Class thresholds from the source paper: insoluble <10 %, soluble >85 %, partial 10-85 %. Nonequilibrium (0.5 °C/min).","doi":"10.1021/acs.jpcb.4c06500","comments":"Chitosan in Diethyl ether at 5.03 mg/mL is partially soluble: transmission between 10 and 85 % at some temperature on cooling. Class refers to nonequilibrium behaviour during the cooling ramp, not thermodynamic solubility. Data: Amrihesari et al., J. Phys. Chem. B 2024 (github.com/mona2442/Polymer-Solubility-Data_Crystal16)."},{"id":37,"polymer":"Chitosan","solvent":"Diethyl ether","concentration_mg_ml":"50.14","molecular_weight":"15000","supplier":"Polysciences","solubility_class":"Insoluble","transmission_10C":"0","transmission_25C":"0","transmission_60C":"0","cloud_point_C":"","method":"Experiment","conditions":"50.14 mg/mL, 10-60 °C, 0.5 °C/min","conditions_detail":"Crystal16 turbidity (645 nm), cooling ramp 60 to 10 °C at 0.5 °C/min after two heat/cool cycles; holds 120 min at 10 °C and 60 min at 60 and 25 °C; stirring 900 rpm. Sample: 50.14 mg/mL polymer, Mn 15000 g/mol (Polysciences); solvent purity 99.8 %. Transmission binned per 1 °C (median of Savitzky-Golay filtered cooling-phase points, n=51); observed range 0-0 %. Class thresholds from the source paper: insoluble <10 %, soluble >85 %, partial 10-85 %. Nonequilibrium (0.5 °C/min).","doi":"10.1021/acs.jpcb.4c06500","comments":"Chitosan in Diethyl ether at 50.14 mg/mL is insoluble: turbid (T < 10 %) over the whole 10-60 °C cooling ramp. Class refers to nonequilibrium behaviour during the cooling ramp, not thermodynamic solubility. Data: Amrihesari et al., J. Phys. Chem. B 2024 (github.com/mona2442/Polymer-Solubility-Data_Crystal16)."},{"id":38,"polymer":"Chitosan","solvent":"Ethyl acetate","concentration_mg_ml":"14.98","molecular_weight":"15000","supplier":"Polysciences","solubility_class":"Insoluble","transmission_10C":"1","transmission_25C":"1","transmission_60C":"1","cloud_point_C":"","method":"Experiment","conditions":"14.98 mg/mL, 10-60 °C, 0.5 °C/min","conditions_detail":"Crystal16 turbidity (645 nm), cooling ramp 60 to 10 °C at 0.5 °C/min after two heat/cool cycles; holds 120 min at 10 °C and 60 min at 60 and 25 °C; stirring 900 rpm. Sample: 14.98 mg/mL polymer, Mn 15000 g/mol (Polysciences); solvent purity 99.5 %. Transmission binned per 1 °C (median of Savitzky-Golay filtered cooling-phase points, n=51); observed range 1-1 %. Class thresholds from the source paper: insoluble <10 %, soluble >85 %, partial 10-85 %. Nonequilibrium (0.5 °C/min).","doi":"10.1021/acs.jpcb.4c06500","comments":"Chitosan in Ethyl acetate at 14.98 mg/mL is insoluble: turbid (T < 10 %) over the whole 10-60 °C cooling ramp. Class refers to nonequilibrium behaviour during the cooling ramp, not thermodynamic solubility. Data: Amrihesari et al., J. Phys. Chem. B 2024 (github.com/mona2442/Polymer-Solubility-Data_Crystal16)."},{"id":39,"polymer":"Chitosan","solvent":"Ethyl lactate","concentration_mg_ml":"5.22","molecular_weight":"15000","supplier":"Polysciences","solubility_class":"Partially soluble","transmission_10C":"21","transmission_25C":"22","transmission_60C":"23","cloud_point_C":"","method":"Experiment","conditions":"5.22 mg/mL, 10-60 °C, 0.5 °C/min","conditions_detail":"Crystal16 turbidity (645 nm), cooling ramp 60 to 10 °C at 0.5 °C/min after two heat/cool cycles; holds 120 min at 10 °C and 60 min at 60 and 25 °C; stirring 900 rpm. Sample: 5.22 mg/mL polymer, Mn 15000 g/mol (Polysciences); solvent purity 98 %. Transmission binned per 1 °C (median of Savitzky-Golay filtered cooling-phase points, n=210); observed range 21-23 %. Class thresholds from the source paper: insoluble <10 %, soluble >85 %, partial 10-85 %. Nonequilibrium (0.5 °C/min).","doi":"10.1021/acs.jpcb.4c06500","comments":"Chitosan in Ethyl lactate at 5.22 mg/mL is partially soluble: transmission between 10 and 85 % at some temperature on cooling. Class refers to nonequilibrium behaviour during the cooling ramp, not thermodynamic solubility. Data: Amrihesari et al., J. Phys. Chem. B 2024 (github.com/mona2442/Polymer-Solubility-Data_Crystal16)."},{"id":40,"polymer":"Chitosan","solvent":"Ethyl lactate","concentration_mg_ml":"50.13","molecular_weight":"15000","supplier":"Polysciences","solubility_class":"Insoluble","transmission_10C":"0","transmission_25C":"0","transmission_60C":"0","cloud_point_C":"","method":"Experiment","conditions":"50.13 mg/mL, 10-60 °C, 0.5 °C/min","conditions_detail":"Crystal16 turbidity (645 nm), cooling ramp 60 to 10 °C at 0.5 °C/min after two heat/cool cycles; holds 120 min at 10 °C and 60 min at 60 and 25 °C; stirring 900 rpm. Sample: 50.13 mg/mL polymer, Mn 15000 g/mol (Polysciences); solvent purity 98 %. Transmission binned per 1 °C (median of Savitzky-Golay filtered cooling-phase points, n=51); observed range 0-0 %. Class thresholds from the source paper: insoluble <10 %, soluble >85 %, partial 10-85 %. Nonequilibrium (0.5 °C/min).","doi":"10.1021/acs.jpcb.4c06500","comments":"Chitosan in Ethyl lactate at 50.13 mg/mL is insoluble: turbid (T < 10 %) over the whole 10-60 °C cooling ramp. Class refers to nonequilibrium behaviour during the cooling ramp, not thermodynamic solubility. Data: Amrihesari et al., J. Phys. Chem. B 2024 (github.com/mona2442/Polymer-Solubility-Data_Crystal16)."}]}